279-2-36717-10 Circuit Protection |
|
Allicdata Part #: | 279-2-36717-10-ND |
Manufacturer Part#: |
279-2-36717-10 |
Price: | $ 115.68 |
Product Category: | Circuit Protection |
Manufacturer: | Sensata-Airpax |
Short Description: | CIRCUIT BREAKER MAG-HYDR LEVER |
More Detail: | N/A |
DataSheet: | 279-2-36717-10 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
4 +: | $ 105.16600 |
Series: | * |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Moisture Sensitivity Level (MSL): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A circuit breaker is an essential electrical device that is designed to prevent against short-circuits and overloads in electrical systems. The 279-2-36717-10 circuit breaker is a single-pole circuit breaker with 10 amps of interrupting capacity.
The working principle behind the 279-2-36717-10 circuit breaker relies on a bi-metal strip that is calibrated for the intended current levels and the coil to create a magnetic field. The bi-metal strip is heated and expands when current flows through it, bending an arm connected to the strip. This will cause the arm to act against the spring loaded metal latch, operated by the coil. Once the current reaches the maximum permitted limit, the latch will be forced shut, opening the circuit and breaking the flow of current.
The 279-2-36717-10 circuit breaker is suitable for use in a variety of applications, from residential wiring and light commercial installations to industrial services. It can also be used in motor-control and branch-circuit-protection applications, where the interruption of power supply is required in case of overload or short circuiting. For residential requirements, the 279-2-36717-10 circuit breaker provides an intermediate-duty interrupting capacity for single-pole systems. This type of circuit breaker is designed for a wide range of load requirements, from small lighting and appliance circuits to commercial or industrial loads such as heaters, welders, air conditioners and refrigerators and many more.
Besides providing electrical protection in case of a fault, the 279-2-36717-10 circuit breaker is also designed for ease of installation and use. The circuit breaker can be installed in standard panel board, as well as flush or surface mounted in single-hole drilling. It also comes with a range of features, such as breaker test button and lockout tag, which can be used to test the unit for proper working, lock the breaker off from operating when necessary, and provide warning labels for hazards.
In short, the 279-2-36717-10 circuit breaker is an efficient and dependable way to ensure the safety of any electrical system. With a range of applications and features, it is an ideal and cost-effective choice for all electrical protection requirements.
The specific data is subject to PDF, and the above content is for reference
CIRCUIT BREAKER MAG-HYDR LEVER
CIRCUIT BREAKER MAG-HYDR LEVER
CIR BRKR MAG-HYDR 200A 160VDC
CIR BRKR MAG-HYDR
CIRC BRKR THRM
CIR BRKR MAG-HYDR LEVER 10A