2890R-34F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2890R-34F is a type of fixed inductor, which is a passive electronic component made of metal coils that magnify, often multiplied by a factor of ten. Its main function is to store energy temporarily in the form of a magnetic field and to provide an inductive reactance in an electrical circuit. Inductors are often used in combination with capacitors and resistors in signal processing, filters or other analog circuits.

The 2890R-34F is a low-frequency, low-current device with an inductance value of 3.4 uH. It is typically used in switching power supplies, generators, amplifiers, and digital logic circuits. It is also used for audio power filters in combination with capacitors.

The 2890R-34F is made of a ferrite core wound with copper wire and has a more efficient inductance than air-core inductors. The copper wire is usually coated with epoxy resin to protect it from moisture and other environmental factors. The device is resistant to high temperatures and has a long lifespan.

The working principle of the 2890R-34F is quite simple. When a voltage is applied to the device, a magnetic field is created. This magnetic field induces an electric current, which then flows through the inductor’s coil. The current produces a magnetic field in the opposite direction, which creates an opposing force against the magnetic field created by the voltage, resulting in a counter EMF (electromotive force) that opposes the applied voltage, creating a voltage drop.

The voltage drop in an inductor is proportional to the amount of current flowing through the inductor. This effect is known as inductive reactance. The reactance generated by the inductor depends on the frequency of the applied voltage. A higher frequency results in a higher reactance, while a lower frequency results in a lower reactance. Inductors are therefore often used to filter low-frequency noise or to limit high-frequency signals.

In addition to being used to reduce noise and limit signals, the 2890R-34F can also be used as a storage device, allowing an electrical charge to be stored over time. The device is also commonly used in voltage regulation circuits, where it regulates the voltage across the device by controlling the current. The inductor can also be used in resonant circuits, where a combination of capacitors and inductors generate a resonance frequency.

The 2890R-34F is a versatile device with many useful applications in the field of electronics. The device can be used to reduce noise, regulate voltage, and store electrical charge, as well as to create resonant frequencies. Its construction gives it a longer lifespan than other inductors and make it ideal for use in a wide range of applications, from switching power supplies to audio power filters.

The specific data is subject to PDF, and the above content is for reference