29-CBSA-1.0X1.5X0.2

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.200" (5.08mm)
Length - Overall:	1.500" (38.10mm)
Width - Overall:	1.000" (25.40mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount, Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Application Field and Working Principle of 29-CBSA-1.0X1.5X0.2

The 29-CBSA-1.0X1.5X0.2 refers to a specifically designed RF Shield that is engineered using a metal plating process. It is produced to provide superior RF protection for sensitive airborne and ground systems. It is specifically designed to provide military and consumer electronics with a protective layer from outside frequency interference.

Application Field

The 29-CBSA-1.0X1.5X0.2 is suitable for military, aerospace, and commercial applications. It is used in electronic systems such as wireless communications systems, RF guidance systems, radio frequency receivers, and directional control systems. In addition, this shield is also used to protect commercial equipment from electromagnetic interference in order to maintain signal and data transmission quality.

Working Principle

The operating principle of the 29-CBSA-1.0X1.5X0.2 RF shield is based on the use of highly conductive materials. The shield consists of a metal plating layer over a substrate layer. This metal plating creates an electromagnetic shield that is designed to reduce the external signal interference from the environment. When placed between the sensitive instrument and the external source of interference, the shield will block the ingress of undesired signals. The material acts as a conductor and prevents the passage of the signal. This effectively reduces the signal interference and ensures that the desired signal remains clear.The shields also provide an added layer of protection against electromagnetic interference generated from internal sources. This signal interference could be caused by other electronic components or could be generated by the equipment operating in close proximity. The shielding provided by the 29-CBSA-1.0X1.5X0.2 can minimize the amplitude of the undesired signal and reduce the chance of interference.In conclusion, the 29-CBSA-1.0X1.5X0.2 RF shield is designed to protect sensitive electronic systems from external frequency interference. It is suitable for military, aerospace, and commercial applications. The shield is designed using a metal plating process over a substrate layer. This shield acts as a conductor and blocks the ingress of external signal interference. Additionally, it provides an added layer of protection against electromagnetic interference generated from internal sources.

The specific data is subject to PDF, and the above content is for reference