29-CBSA-1.0X2.0X0.2

The 29-CBSA-1.0X2.0X0.2 (or simply 29-CBSA) is a type of RF Shield that offers superior isolation, shielding, attenuation, and protection. It is commonly used in high-frequency applications and is designed to protect against electromagnetic interference (EMI). This type of shield is often used in medical equipment, automobiles, radar systems, and other RF-sensitive applications.

The basic function of the 29-CBSA is to block out or block off unwanted signals, such as RF noise, while still allowing the desired signal to pass through. This is accomplished through the use of a metallic layer that is placed between the source of the interference and the device that needs to be shielded. The metallic layer is then electrically connected to the shielding enclosure and tuned to the specific frequency of the interfering signal. This creates a barrier between the two and prevents the interference from being transmitted.

The 29-CBSA is composed of three primary parts: the case, the backplane, and the metallic layers. The case is made from dielectric material, such as polycarbonate, ABS, acrylic, or polystyrene. This material helps to provide a durable, water-resistant seal in order to protect the contents of the assembly. The backplane provides an opening for the wires to be inserted and secured, while the metallic layers consist of an outer and inner layer. These layers are tuned to the target frequency and serve as the shielding effectiveness. The 29-CBSA also has an electromagnetic shield (EMC) attached to the case, which further reduces electromagnetic interference.

The 29-CBSA is typically mounted onto the surrounding material, such as a wall or a floor. Once the shield has been securely fastened to the material, it is then connected to the device that needs to be protected. The connections typically involve the use of a standard coaxial cable that is soldered onto the backplane. Once this is successfully connected, the system can be calibrated for maximum isolation at the chosen frequency. The system can also be tailored to meet specific requirements, including minimum level of impedance and isolation threshold.

The 29-CBSA is an effective way of protecting equipment from the effects of electromagnetic interference. Its ability to block out unwanted signals while still allowing the desired signal to pass through makes it an ideal choice for many RF-sensitive applications. It is also a relatively easy system to install and maintain, making it suitable for both commercial and industrial applications.