Allicdata Part #: | 29-CBSA-3.75X5.75X0.2-ND |
Manufacturer Part#: |
29-CBSA-3.75X5.75X0.2 |
Price: | $ 18.08 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 29 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 3.750" (95.25mm) X 5.750... |
DataSheet: | 29-CBSA-3.75X5.75X0.2 Datasheet/PDF |
Quantity: | 1000 |
20 +: | $ 16.43350 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.200" (5.08mm) |
Length - Overall: | 5.750" (146.05mm) |
Width - Overall: | 3.750" (95.25mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount, Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shielding is a form of protection that uses a conductive metal material, often copper, to block radio frequency (RF) signals. The purpose of using this type of material is to reduce the level of interference caused by these signals and enhance the performance of electrical and electronic components. 29-CBSA-3.75X5.75X0.2 is an RF shield designed to protect against electromagnetic interference (EMI) and radio frequency interference (RFI) from devices such as radios, cell phones, radar, and Wi-Fi.
The 29-CBSA-3.75X5.75X0.2 is an RF shield that is constructed using a conductive copper substrate with an EMI shielding gasket. The gasket is designed to use the conductive properties of the copper substrate to absorb and dissipate any energy that is emitted by radio frequency signals. This ensures that no RF interference will be able to penetrate the shield and cause interference with the components of the system.
The 29-CBSA-3.75X5.75X0.2 is designed to be used in applications where low RF emissions are required and where sensitive equipment must be properly shielded. The ability to attenuate RF interference makes this type of shield ideal for use in medical, instrumentation, and audio/video applications. This type of shield is also well-suited for any device that is intended to be used in an environment where sensitive equipment is in operation.
The 29-CBSA-3.75X5.75X0.2 also works as an effective barrier against environmental sources of RF interference. This shield is designed to protect equipment from RF emissions from nearby antennas, radios, and other sources of RF interference. This can include anything from radio towers to mobile phone base stations. The gasket also helps to reduce the amount of RF interference from sources in the surrounding environment, which can further improve the performance of the equipment.
To ensure that the maximum amount of RF protection is achieved, the 29-CBSA-3.75X5.75X0.2 must be properly installed. This typically involves using a series of metal clamps and seals to properly mount the shield into place. This ensures that no RF interference can penetrate the shield, allowing the components to operate effectively.
The 29-CBSA-3.75X5.75X0.2 is a specialized type of RF shield that is designed to provide users with the highest level of RF protection. The use of a conductive copper substrate with an EMI shielding gasket helps to absorb and dissipate any energy caused by RF signals, while also providing an effective barrier against environmental sources of RF interference. This makes it an ideal choice for use in medical, instrumentation, and audio/video applications where sensitive equipment must be properly shielded.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...