295-11-35950-14 Circuit Protection

Circuit breakers are a very important component of the electrical system. They are designed to protect electrical components from getting overloaded and causing fires. The 295-11-35950-14 circuit breaker is a type of circuit breaker specifically designed for low-voltage applications. This type of breaker is meant to open an electrical circuit when an overloaded condition is detected, thus protecting the circuit, and allowing it to be reset once the overload situation is resolved.

The 295-11-35950-14 circuit breaker works by sensing the amount of current which passes through the breaker during operation. When the current flow exceeds the rated value, the breaker will trip and open the circuit to prevent further damage from occurring. It should be noted, however, that the breaker will only work when the current reaches a certain level, usually around 120% of the rated current value.

When using the 295-11-35950-14 circuit breaker, it is important to take into consideration its application field. This breaker is rated to handle current levels up to 250 volts and 10-30 amps. It is suitable for use with DC or AC loads, and it is capable of breaking circuits with resistive, inductive, and capacitive loads.

The 295-11-35950-14 circuit breaker is designed to open the circuit when there is an overload condition and then reset once the current has been reset to its normal level. The breaker utilizes what is known as a thermal overload relay, which opens the breaker when too much current passes through the breaker. This thermal overload relay contains a spring-operated mechanism that opens the circuit when the thermal element detects an overload in the current.

When using this type of breaker, it is important to make sure that all of the current ratings are based on the expect operational conditions. For instance, if the voltage is higher than the rated voltage or the current higher than the rated current, it is important to reduce the load in order to prevent the breaker from tripping. Additionally, it is also important to make sure that the breaker is properly connected to its circuit so as to ensure that it performs properly.

In summary, the 295-11-35950-14 circuit breaker is designed for use in low voltage applications and is capable of handling up to 250 volts and 10-30 amps. It uses a thermal overload relay to open the circuit when the current exceeds its rated value. It is important to consider the application field of this type of breaker and to ensure that all of the current ratings are based on expected operational conditions in order to ensure proper protection.