3-1474640-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex, Ribbon Jumper Cables

Flat Flex, Ribbon Jumper Cables, often referred to as 3-1474640-5, are cables that connect two or more electronic components together, usually with soldered termination. These cables are made from thin, flexible conductive materials, in the form of ribbons, which are insulated by a plastic or rubber insulation. Ribbon Jumper Cables are designed to allow the cable to be routed around tight corners and through narrow apertures such as boxes, enclosures, and other items of equipment. The design of the Ribbon Jumper Cable allows for a very small footprint which makes these cables ideal for use in areas where space is at a premium.

The relatively low profile of the Ribbon Jumper Cable allows it to withstand hostile conditions, such as extreme temperatures, vibration, and shock. As a result, these flat flex cables are ideal for use in rugged applications such as military and aerospace electronics, industrial controls, and test and measurement instrumentation. As these cables are insulated, they are capable of withstanding a significantly wide range of temperatures and voltages. The insulation also provides enhanced safety, as current flows can be blocked or diverted, as needed.

The main components used to construct the Ribbon Jumper Cable are the heat-shrinkable tubing, silicone rubber, and formed wire. The heat-shrinkable tubing is used to provide insulation for the jumper wire. The tubing also serves to mechanically secure the ribbon cross-section to the wire form. Silicone rubber is used to provide flexibility and dielectric strength to the cables. Finally, a formed wire is used to shape the flat cable into its finished shape.

Flat Flex, Ribbon Jumper Cables are available with a wide variety of sizes, shapes, and materials. A variety of configurations are available, such as single stranded, multi stranded, stranded-grounded, single conductor, and twisted pair. The more complex the cable design, the higher the cost of the cable. In addition, the flexibility of these cables enables them to be used in a variety of configurations for device interconnections.

The operating and installation principles of 4-1474640-5 Ribbon Jumper Cables are quite simple. First, the patient is connected to an electrical terminal. Then, an appropriate jumper cable needs to be installed between the terminal and the appropriate electrical device. After this is complete, the jumper cable is plugged into a circuit breaker to link the two devices together, allowing electricity to flow freely between them. The operator then adjusts the voltage or current as necessary.

Flat Flex, Ribbon Jumper Cables provide a cost effective solution for safely connecting electrical devices. While the cables may be slightly more expensive than other types of cables, they offer a number of advantages, including robustness, flexibility, and the ability to be easily routed around obstacles. Thus, these cables are perfect for applications where space is limited or where an extreme electrical environment is expected.

The specific data is subject to PDF, and the above content is for reference