30-017-A-06

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pushbutton switches are widely used in a variety of applications and are an essential part of many industrial, commercial, and consumer products. Modern pushbutton switches are capable of performing a wide variety of tasks, such as controlling the flow of electricity in an appliance, signaling an alarm condition, or activating an automated system. The 30-017-A-06 is a type of pushbutton switch that is often used in controlling the flow of electricity in a machine.

The 30-017-A-06 pushbutton switch is designed for use in industrial applications in which a positive or negative contact is needed. This type of switch is particularly useful when a continuous signal is required, such as in controlling a motor. The 30-017-A-06 uses a momentary contact that is reversed when released. This allows the user to control the speed of the motor or the direction in which it turns.

The 30-017-A-06 switch is designed to be used in applications that involve both high and low-voltage electrical circuits. It requires a minimum voltage of 12 volts and a maximum of 250 volts. The switch is rated for a maximum current of up to 10 amps and is capable of switching between circuits safely. The 30-017-A-06 switch is designed to work in both AC and DC electrical circuits.

The 30-017-A-06 switch operates by using a simple contact mechanism. When the button is pressed, the switch makes contact and closes the circuit, allowing the current to flow. When the button is released, the switch opens the circuit, stopping the current flow. This type of switch is sometimes referred to as a latching or toggle switch.

In addition to its use as a control switch, the 30-017-A-06 can be used to signal the presence of an alarm condition. When the button is pressed, the switch will close the circuit and the alarm will be activated. The alarm can then be silenced by pressing the button again to open the circuit. The alarm will remain active until the switch is released.

The 30-017-A-06 switch can also be used to control automated systems, such as vending machines and amusement rides. By pressing the button, the switch will activate the system, allowing it to run its cycle. When the button is released, the system will stop and revert to its default state.

The 30-017-A-06 is a versatile switch that has a wide range of uses. It is designed for use in industrial applications and can be used to control the flow of electricity in machines, to signal an alarm condition, or to control an automated system. The 30-017-A-06 switch is a valuable addition to any industrial operation and can provide a reliable and cost-effective solution to a variety of applications.

The specific data is subject to PDF, and the above content is for reference