30-100R-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An attenuator is a device commonly used in electronics for reducing the power of a signal without introducing any distortion or other errors. It is especially useful in cases where one needs to reduce the signal in a controlled manner in order to protect sensitive equipment or components. From a physical point of view, it can be seen as a resistor installed in series or parallel with the input signal, or a combination of resistors connected in both ways. Among the different devices, the 30-100R-S attenuator has become very popular due to its low cost and reliability.

The 30-100R-S attenuator is a type of resistor-capacitor (RC) attenuator which uses fixed component values. This device is used for attenuating medium-bandwidth signals over an adjustable range of 0.2dB to 10dB. The components used in the device are a 30-Ohm resistor, a 100-Ohm resistor and a series capacitor and the impedance of the device increases as the decibel range increases.

The working principle of the 30-100R-S attenuator is very simple. Incoming signals are first filtered by the resistor, which reduces the voltage and current of the signal. The voltage and current are then further reduced by the series capacitor, which introduces a frequency-dependent signal loss. The signal is further attenuated by the second resistor, which acts as a load resistor that limits the current throughput.

The 30-100R-S attenuator has a wide range of applications in many fields. Its ability to control and reduce signal level with minimal distortion makes it suitable for use in telephone networks, computer networks, radio broadcasting, and satellite communications systems. It can also be used in sound systems to reduce the signal level going to a speaker, allowing it to be operated at a safe level. Furthermore, it can be useful for testing and monitoring of various electronic and electrical systems.

In conclusion, the 30-100R-S attenuator is a low-cost and reliable device for controlling and reducing the power of signals. It is ideal for many medium-bandwidth applications and has proven to be very effective in reducing distortion and protecting sensitive systems. With its multiple applications, it is an asset for any electronic engineer or technician.

The specific data is subject to PDF, and the above content is for reference