30-300R-S

Series:	--
Packaging:	Tray
Part Status:	Active
Attenuation Value:	--
Frequency Range:	0Hz ~ 3GHz
Power (Watts):	30W
Impedance:	300 Ohms
Package / Case:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IntroductionR-S attenuators are used in audio, broadcast and telecommunications applications as an effective way to adjust voltages. An R-S attenuator consists of two resistors connected in series, usually arranged in various combinations, allowing adjustments of signal levels between two points. A simple two-resistor configuration is shown below, where R1 and R2 are the two resistors and the two labels labelled A and B show the attenuated (lower) output and the bypass signal (louder) respectively.



The attenuator works by adjusting the ratio between the two resistors connected. A higher resistance value for the first resistor will cause a lower output voltage. The equation for calculating the output voltage at point B is equal to the input voltage (Vin) times the resistance Ratio (R1/R2) divided by the sum of both resistors (R1+R2).


Application Field

R-S attenuators are used in a wide range of applications, in both commercial and industrial settings. They are particularly useful in audio systems, broadcast systems, and telecommunications systems, where precise levels of sound or signal need to be adjusted.R-S attenuators are used to control the levels of cables and amplifiers in audio systems, in order to prevent overloads or distortion of the audio signal. They also provide a means of adjusting signal levels in order to adjust the balance between left and right audio channels.In broadcast and telecommunications systems, R-S attenuators are used to adjust the levels of signals being transmitted, allowing signals to be adjusted to acceptable levels and preventing interference between systems.Working Principle

R-S attenuators work by adjusting the ratio between two resistors connected in series. The two resistors have a ratio of Unknown: 1, with R1 having the highest resistance value and R2 having the lowest. The equation for calculating the output voltage at point B is equal to the input voltage (Vin) times the resistance Ratio (R1/R2) divided by the sum of both resistors (R1+R2).If the resistance ratio is high, the output voltage will be low. If the resistance ratio is low, the output voltage will be high. Thus, by adjusting the ratio between the two resistors, the output voltage can be adjusted accordingly.Conclusion

R-S attenuators are a simple and effective way to adjust voltages in audio, broadcast and telecommunications applications. They are capable of precisely adjusting the levels of signals, allowing for proper balance between left and right audio channels, and preventing interference between systems. By adjusting the ratio between two resistors in series, the output voltage can be adjusted accordingly.

The specific data is subject to PDF, and the above content is for reference