3003868

Voltage - UL:	600V
Operating Temperature:	--
Stripping Length:	9mm
Material Flammability Rating:	UL94 V-0
Material - Insulation:	Polyamide (PA), Nylon
Height (Max):	0.866" (22.00mm)
Length:	1.260" (32.00mm)
Housing Color:	Blue
Features:	--
Wire Gauge or Range - mm²:	0.14-2.5mm²
Wire Gauge or Range - AWG:	14-26 AWG
Series:	CLIPLINE MZDB
Current - UL:	15A
Voltage - IEC:	800V
Current - IEC:	17.5A
Termination Style:	Push In, Spring
Terminal - Width:	10.4mm
Number of Levels:	1
Number of Positions:	4
Mounting Type:	Direct Mount
Type:	Middle
Part Status:	Obsolete

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Terminal blocks are specialized electrical components used in wiring and other electrical systems. They serve to connect wires and other electrical components together, making them well-suited for connecting signals or power to multiple devices. This article covers general information about terminal blocks, including their application fields and working principles.

Overview and Types

Terminal blocks commonly consist of a strip of metal material with multiple slots to hold electrical wires, allowing wires to be connected securely. Commonly found in electromechanical systems, such as power supplies, these components are used to connect compatible electrical components, such as wires, relays, contacts, and switches, allowing the flow of current between components. Terminal blocks are available in a variety of sizes, shapes, and designs, depending on their intended use. Various materials, such as plastics and aluminum are used for the purposes of insulation or heat protection.

Application Fields

Terminal blocks are used in a variety of industries, including automotive, electrical, and telecommunications. In the automotive industry, they are used to connect control circuits, such as braking and ignition systems, together. In the electrical industry, terminal blocks are used to connect incoming power and load output lines together. In telecommunications, they are used to provide a means of connecting transmission lines and ground systems.

Connector Types

Terminal blocks are typically classified by the type of connecters they use, such as screw, spring, and plug and play. Screw-type terminal blocks use screws to secure the wire in the slot, while spring-type blocks use springs to hold the wire in the slot. Plug and play-style terminal blocks are specially designed for quick and easy wiring and installation, as they allow users to plug the wiring directly into the block without the need for additional soldering or other hardware.

Working Principle

Terminal blocks work by providing a safe and secure means of connecting multiple electrical components together. They allow for a greater number of connections in a smaller space than what would be required if other methods such as soldering, crimping or duct taping were used. When terminal blocks are used to connect different components, it is important to ensure the correct size of the slots is used. If the slot size is too small, the wire will not fit and if it is too large, it may slip out of the slot during operation and possibly cause a short circuit. To ensure a secure connection, the wire should be pushed firmly into the slot until it is fully seated. To remove the wire, merely pull it out of the slot. As the wire is removed, it may be necessary to push the sprung contacts back into place.

Conclusion

Terminal blocks are specialized electrical components used in many industries, including automotive, electrical and telecommunications. They provide a secure way of connecting compatible electrical components together, often in a smaller space than what would be required using other methods. Their working principle is quite simple, with wires being securely fitted into the slots according to the size required, and removed with a firm but gentle tug.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description