
Allicdata Part #: | 300X11199X-ND |
Manufacturer Part#: |
300X11199X |
Price: | $ 3.47 |
Product Category: | Connectors, Interconnects |
Manufacturer: | Conec |
Short Description: | 25 POS HOOD DIE CAST LONG JACK |
More Detail: | Position Connector |
DataSheet: | ![]() |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
50 +: | $ 3.14874 |
Series: | * |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
D-Sub connectors are perhaps the most commonly used type of connector in the world of electronics. They are commonly used in computers, industrial control systems, and telecommunications equipment. These connectors are available in various shapes and sizes, such as D-shaped, D-shaped backshells, or hoods.
Applications and Uses
D-sub connectors are often used as junction points between two devices. They are typically used in electrical systems where high-speed communications, data transmissions, and signal transmissions are needed.
D-shaped backshell connectors are often used for mechanical support, strain relief, and environmental protection. Hoods are generally used when two devices need to be connected and sealed against moisture and pollutants. Backshells are also used for wiring connections.
Working Principle
D-sub connectors work by providing electrical connection between two points. They are built from plastic or metal housings that contain pins or sockets to which wires can be connected. When the d-sub connectors are plugged into the appropriate port, an electrical connection is made between the two points.
The most common type of d-sub connectors are those with wedge-shaped pins that are made from a combination of copper and metal alloys. These pins are inserted into holes in the d-sub connector housing. The wedge-shaped pins are then compressed against the sides of the holes when the connector is inserted into the port. This creates an electrical and/or mechanical connection between the two points.
D-shaped backshells and hoods work by providing a protective enclosure for the pins and sockets that are attached to the connector. They are commonly made from plastic and are designed to snap onto the back of the connector. The hoods and backshells provide a seal to help protect against moisture, dirt, dust, and other types of environmental hazards.
Conclusion
D-Sub, D-Shaped Connectors, Backshells, and Hoods are commonly used in a variety of industries and applications. They are available in a range of shapes and sizes and are made from various materials, such as plastic and metal. The main purpose of these connectors is to provide an electrical connection between two points. D-shaped backshells and hoods provide additional protection against environmental hazards.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
300X11379X | Conec | 0.89 $ | 1000 | 15POS TOP ENTRY BLACK15 P... |
IRL04EAB 300X200X0.25 | TDK Corporat... | 0.0 $ | 1000 | SHEET FERRITE 200X300MM |
300X11349X | Conec | 1.65 $ | 1000 | 9POS SIDE ENTRY MET.PLAS9... |
300X11309X | Conec | 4.69 $ | 1000 | 15POS DIE CAST+SLIDE LCK1... |
IRJ09AB 300X200X0.13 | TDK Corporat... | 0.0 $ | 1000 | SHEET FERRITE 200X300MM |
XW2Z-300X | Omron Automa... | 50.46 $ | 1000 | CABLE ASSEMBLY INTERFACE ... |
300X11149X | Conec | 3.05 $ | 1000 | 25POS DIE CAST SHORTJACK2... |
300X11019X | Conec | 0.0 $ | 1000 | 9 POS HOOD MET.PLS.LONG J... |
300X10109X | Conec | 0.71 $ | 1000 | 9 POS METALIZED HOODPosit... |
300X10879X | Conec | 0.85 $ | 1000 | 9POS MET.PLST.LONG SCREW9... |
300X10179X | Conec | 0.67 $ | 378 | 15POS COMPUTER GREY15 Pos... |
300X11169X | Conec | 4.51 $ | 1000 | 50POS DIE CAST SHORTJACK5... |
IRJ09AB 300X200X0.5 | TDK Corporat... | 0.0 $ | 1000 | SHEET FERRITE 200X300MM |
300X11369X | Conec | 1.48 $ | 1000 | 9POS TOP ENTRY BLACK9 Pos... |
300X10909X | Conec | 1.56 $ | 1000 | 25POS MET.PLST.LONG JACK2... |
300X10119X | Conec | 1.02 $ | 39 | 15POS COMPUTER METALIZED1... |
300X10949X | Conec | 0.35 $ | 1000 | 25POS GREY 2 PCS TYPE25 P... |
IRJ17AB 300X200X0.4 | TDK Corporat... | 0.0 $ | 1000 | SHEET FERRITE 200X300MM |
300X10799X | Conec | 2.43 $ | 150 | 25/25 POS. METALIZ.ADAP.H... |
IRJ09AB 300X200X0.4 | TDK Corporat... | 0.0 $ | 1000 | SHEET FERRITE 200X300MM |
300X10999X | Conec | 0.83 $ | 1000 | 15POS GREY LONG JACK SCR1... |
IRJ09AB 300X200X0.25 | TDK Corporat... | 0.0 $ | 1000 | SHEET FERRITE 200X300MM |
300X11329X | Conec | 0.95 $ | 1000 | 9POS SIDE ENTRY - GREY9 P... |
300X11119X | Conec | 2.93 $ | 1000 | 37 POS HOOD MET.PLS.FLAT ... |
PCM20G-300X400X0.18 | t-Global Tec... | 19.52 $ | 119 | THERM PAD 400MMX300MM GRA... |
300X10219X | Conec | 0.74 $ | 1000 | 37POS COMPUTER GREY37 Pos... |
300X11129X | Conec | 2.25 $ | 160 | 9 POS HOOD DIE CAST SHORT... |
300X10209X | Conec | 0.35 $ | 1000 | 25POS COMPUTER GREY25 Pos... |
300X11319X | Conec | 4.69 $ | 1000 | 15POS DIE CAST R/A ENTRY1... |
300X11339X | Conec | 0.85 $ | 1000 | 25POS SIDE ENTRY - GREY25... |
IRLG5AB 300X200X0.5 | TDK Corporat... | 0.0 $ | 1000 | SHEET FERRITE 200X300MM |
300X10939X | Conec | 0.55 $ | 1000 | 15POS GREY 2 PCS YPE15 Po... |
300X11459X | Conec | 4.35 $ | 1000 | 15POS DIE CAST SL15 Posit... |
300X11399X | Conec | 1.72 $ | 1000 | 37POS TOP ENTRY BLACK37 P... |
300X11449X | Conec | 2.42 $ | 1000 | 50P TWO PIECE PLASTIC50 P... |
300X11279X | Conec | 2.79 $ | 1000 | 15P DIE CAST TOP ENT J.S.... |
300X10989X | Conec | 0.78 $ | 1000 | 9POS GREY LONG JACK SCR9 ... |
300X10159X | Conec | 1.1 $ | 1000 | 37POS COMPUTER METALIZED3... |
300X11419X | Conec | 1.46 $ | 1000 | 9POS TOP ENTRY METALLIZ9 ... |
IRL03AB 300X200X0.25 | TDK Corporat... | 0.0 $ | 1000 | SHEET FERRITE 200X300MM |
BACKSHELL 68POSPosition Connector

CONN HOOD 68PINPosition Connector

CONN HOOD 80PINPosition Connector

DSUB JUNCTION SHELLPosition Connector

CONN BACKSHELL 50POS C/W 4-4050 Position...

FCT HOOD S1 70 DEG SHLD PLSTC W/9 Positi...
