3035694

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are widely used in a variety of industrial automation and control applications. The most common type of terminal blocks is the DIN rail terminal block, which is used to connect wires, connect sections of control system circuits, and distribute power. In order to meet the various requirements of control system and electrical wiring, there are many kinds of terminal blocks: top-wired terminal blocks, side-wired terminal blocks, panel-mounted terminal blocks, non-standard terminal blocks, din rail terminal blocks, screw-connection terminal blocks, and SNAP-ON terminal blocks, to name a few.

DIN rail terminal blocks are a popular choice in industrial automation applications. The DIN rail is a standardized inner support rail for mounting terminal blocks, switch boxes, and electrical enclosure components. The name “DIN” is an acronym for the German term “Deutsches Institut fuer Normung” (DIN). This type of terminal block is designed to slide into place on the rail and be held in place by two retaining clips. The rail sections can be joined together, allowing the wiring of a large or complex system to spread out over a larger area such as a wall.

DIN rail terminal blocks provide good performance over a wide temperature range and have a minimal voltage drop due to their low resistance, making it an ideal choice for most control applications. The termination points of these terminal blocks allow multiple wires to be connected to the same contact, eliminating the need for separate terminal blocks or the use of multiple small wires. The larger contacts on the wired terminal blocks make it easier to attach the wires of various sizes. As a result, these terminal blocks are often used in areas where a dense number of wiring points are required.

The working principle of DIN rail terminal blocks is fairly simple. When a wire is inserted into the terminal block, it is held in place by the metal spring. The spring compresses the wire against the conductor, making a good electrical connection. If the connection needs to be changed, the wire can be taken out and a new one inserted into the terminal block. As well, the electrical connection can be tested and verified by using a continuity tester.

DIN rail terminal blocks are compact, reliable, and easy to install. The slightly curved design allows for dense wiring. In addition, the modular nature of the terminal blocks means they can easily be moved or rearranged as needed in the control system. The use of DIN rail terminal blocks in the industrial automation sphere is an efficient, cost-effective solution for connecting, terminating, and distributing power.

The specific data is subject to PDF, and the above content is for reference