305-NWB24H-O

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Panel indicators, pilot lights, such as the 305-NWB24H-O, are commonly used in automated control systems, and their primary function is to indicate when a device or system is operating or malfunctioning. By providing a visual indication of system status, these indicators can quickly alert operators of at-a-glance system status. The 305-NWB24H-O is a bicolor LED panel indicator with a 3.5 mm diameter round head, and is designed to alert customers that their machine is active and working properly. This indicator is rated for a 95 to 265 VAC input voltage and a 25 mA maximum current draw, allowing it to be used in a variety of scenarios. The physical body is made of polyester and the lens is made of silicone, which means it is robust enough to withstand dust, dirt, and other contaminants.

The 305-NWB24H-O is capable of displaying both green and red light, and it does so in accordance to the voltage applied to its terminals. If a voltage greater than 135 VAC is applied, then the indicator will glow green; if a voltage less than 135 VAC is applied, then the indicator will glow red. This indicates whether a machine is in a “Start” or “Stop” mode. This indicator is typically used in conjunction with an automated control system, as it can be used to let operators know when a machine has begun or stopped running. This indicator could also be used as an indicator of the presence of a voltage, such as in applications where a power source must be present for a machine to operate.

The indicator is equipped with two screw terminals that accept a wire range of 0-2.5mm2. This makes it ideal for hard-wiring into a control panel. It also comes with a long service life, rated at a minimum of 50,000 hours, meaning it should last for years or even decades with only minimal maintenance required. The 305-NWB24H-O is also UL listed, meaning it meets the safety requirements set forth by the Underwriters Labs. This ensures the indicator meets all applicable safety codes and is safe to use in its intended application.

In conclusion, the 305-NWB24H-O is a LED panel indicator designed for use in automated control and signalling applications to provide an at-a-glance indication of system or machine status. This bicolor indicator is UL listed and rated for 95 to 265 VAC input voltage, and can be wired into a control panel via its two terminal screw connectors. It has a long service life and can provide an indication of either “Start” or “Stop” mode depending on the voltage applied to it. This indicator is an ideal solution for a variety of applications where a visual indication is needed, such as indicating the presence of a voltage in an automated control system.

The specific data is subject to PDF, and the above content is for reference