
Allicdata Part #: | 307-0195-S-ND |
Manufacturer Part#: |
307-0195-S |
Price: | $ 37.79 |
Product Category: | Circuit Protection |
Manufacturer: | Staco Energy Products Company |
Short Description: | FUSE |
More Detail: | N/A |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | $ 34.36020 |
Series: | -- |
Part Status: | Active |
Fuse Type: | -- |
Response Time: | -- |
Package / Case: | -- |
Mounting Type: | -- |
Breaking Capacity @ Rated Voltage: | -- |
Approvals: | -- |
Operating Temperature: | -- |
Color: | -- |
Size / Dimension: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
307-0195-S Application Field and Working Principle
The 307-0195-S is a type of fast-acting fuse used in a wide variety of electronic and electrical applications. It is mainly used as a protection device in commercial and industrial applications or where the power supplies large motors and transformers. This type of fuse typically has a fuse time less than 10 milliseconds at normal working currents.
Description
The 307-0195-S is a single-element, fast-acting fuse with a solid-state design and compact dimensions. It is rated for operation up to 1500 volts, and its conductor size can range from 18 AWG to 10 AWG. This type of fuse utilizes a unique combination of miniaturized thin film technology to ensure optimal performance and reliability. The fuse body is made of copper with a polypropylene housing. The fuse element is a single-winding element with a melting point of about 125°C. The fuse is equipped with a shutter mechanism to avoid any accidental operation. The rated current of this type of fuse is based on the amount of time that it takes for the fuse element to fully melt if the rated current is exceeded.
Mounting
The 307-0195-S has a snap-in design and can be easily mounted on a circuit board with no additional tools or support. It is also compatible with any mounting pole that has a 5.08mm diameter or greater. The fuse can also be placed in DIN rail mounted fuse holders.
Features and Benefits
- High-voltage protection
- High-current capability
- Solid-state design
- Low-resistance
- Compact dimensions
- High surge handling capability
- Wide temperature range
Applications
The 307-0195-S is mainly used to protect electrical equipment and circuits from overcurrent or short-circuit damage. It is commonly used in motor control centers, professional audio equipment, HVAC systems, and many other types of industrial and commercial applications.
Working Principle
When the current reaches or exceeds the rated current of the fuse, the fuse element will begin to heat up and eventually fully melt. Once the fuse element melts, the current is cut off and the circuit is disconnected from the power source. The melting time of the fuse depends on the conductor size and the amount of current that is exceeding the rated current of the fuse. The melting temperature of the fuse will also increase as the current increases. Once the fuse element has melted, the circuit will remain disconnected and the fuse must be replaced.
The specific data is subject to PDF, and the above content is for reference
FUSE BRD MNT 1.6A 125VAC/VDC SMD

FUSE BOARD MNT 3.15A 125VAC/VDC

FUSE BOARD MNT 350MA 125VAC/VDC

FUSE BRD MNT 2.5A 125VAC/VDC SMD

FUSE BRD MNT 1.6A 125VAC/VDC SMD

FUSE BOARD MNT 1A 250VAC RADIAL
