3120-F324-P7T1-W19DG4-8A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are an important component in electrical systems and are used to prevent serious harm or damage that can be caused by overloaded circuits. The 3120-F324-P7T1-W19DG4-8A circuit breaker is a manual reset thermal overload relay that is used to prevent excess current in the circuit.

These types of circuit breakers are most often used in industrial applications where a large amount of current is necessary, such as machine shops, manufacturing plants, and industrial sites. They are also used in many residential applications as well, such as in houses and apartments.

The 3120-F324-P7T1-W19DG4-8A circuit breaker is designed to cut off power to the circuit when the current reaches a pre-set value. The pre-set value is determined by the manufacturer, and it can be adjusted if necessary. The current limit is usually set to between 10 and 20 times the full load current for the circuit. This ensures that the breaker will trip before the circuit is overloaded and the wiring is damaged.

The 3120-F324-P7T1-W19DG4-8A circuit breaker uses a thermal overload relay to sense the current flowing through the circuit. The relay is connected to a bimetallic strip, which is a strip of two different metals that expand or contract depending on the temperature. As the current increases, the temperature of the bimetallic strip increases, causing it to expand. When it expands, it pushes a set of contacts open, which trips the breaker and disconnects the power.

When the circuit is over loaded the breaker will stay tripped until the current is lowered to a safe level and the contacts on the bimetallic strip can close again. The breaker can then be manually reset by pressing the reset button. This resets the bimetallic strip and allows the breaker to trip again should the overload occur again.

The 3120-F324-P7T1-W19DG4-8A circuit breaker is designed to provide reliable protection against short circuits and overloads in industrial applications. The thermal overload relay and the bimetallic strip provide reliable protection and ensure that the circuit will remain safe even in the event of an overload.

The 3120-F324-P7T1-W19DG4-8A circuit breaker is a reliable and simple solution for protecting against dangerous overloads. The bimetallic strip ensures that the breaker will trip before the circuit becomes overloaded and the current limit ensures that it will not become overloaded even in the most extreme conditions.

The specific data is subject to PDF, and the above content is for reference