3120-F621-P7T1-W02H-12A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A circuit breaker is a device that is used to protect electrical circuits from damage caused by overload or short circuit conditions. The 3120-F621-P7T1-W02H-12A circuit breaker is a 240VAC, 40A rated, single pole circuit breaker that is used to protect electrical circuits from overloads and short circuits. It is a UL 1077 Type C listed circuit breaker that is UL rated to 10,000A at 250VAC.

The 3120-F621-P7T1-W02H-12A circuit breaker has two distinct functions: overload protection and short circuit protection. The overload protection is provided by the thermal-magnetic tripping mechanism, which consists of a thermal element and a magnetic element. The thermal element is responsible for sensing an overloaded condition, while the magnetic element responds to short circuit conditions. When the ambient temperature or overload current in the circuit exceeds the pre-set values, the thermal element will trip the breaker and break the circuit.

The short circuit protection is provided by the magnetic element. When the current in the circuit exceeds the pre-set value, the magnetic element tripping mechanism will break the circuit. This will prevent further damage to the circuit from a short circuit condition.

The 3120-F621-P7T1-W02H-12A circuit breaker is typically used in residential and commercial installations, such as in HVAC systems, heating and air conditioning systems, and power distribution panels. It is also used in industrial applications such as motor control centers, power supplies, and other low voltage applications. As a UL 1077 Type C listed circuit breaker, it is suitable for use in both single phase and three phase applications.

In order to ensure that the 3120-F621-P7T1-W02H-12A circuit breaker is functioning properly and providing the required overload and short circuit protection, it must be tested and maintained on a regular basis. Visual inspections should be performed to ensure that the contacts are clean and undamaged, and that the operating handle is moving freely. The contacts should be cleaned and inspected for wear and other damage, and the operating handle should be tested.

Regular maintenance should also include testing of the circuit breaker’s ground fault, thermal magnetic tripping, and interruption capabilities. The ground fault test should be performed using a ground fault test set, and the tripping and interruption tests should be conducted using an appropriate type of testing equipment. If any abnormalities are found, the circuit breaker should be replaced with a new one.

The 3120-F621-P7T1-W02H-12A circuit breaker offers superior protection from both overloads and short circuits and is suitable for a variety of applications. It is important, however, to regularly inspect and test the circuit breaker to ensure proper functionality and to prevent damage to the electrical system or circuits.

The specific data is subject to PDF, and the above content is for reference