3314-1003

3M’s 3314 Series of connectors are utilized in a variety of applications, such as telecommunications, medical, lighting, automotive, and aerospace. The 3314-1003 Connector is a two-piece male pin device. It typically consists of a male pin and a plastic hood. Its primary function is to interconnect two or more printed circuit boards.

Advantages

The 3314-1003 Connector provides a secure connection between two printed circuit boards. Its simple structure offers various advantages for designers and engineers, and its relatively inexpensive cost makes it attractive to a broad range of industries. Some of the advantages the 3314-1003 Connector provides include:

• High durability
• Reduced complexity of assembly
• Increased system reliability
• Ease of installation and removal
• High shock and vibration resistance
• Low-cost strip form factor
• Compatibility with most PC boards

Limitations

The 3314-1003 Connector has a few limitations that should be considered when utilizing this type of connector. The limited number of pins can be restrictive if a higher pin count is needed, and its rigidity is not ideal for situations where flexibility is important. Additionally, the endurance and fatigue properties of the 3314-1003 may not be adequate for many automotive applications.

Working Principle

The 3314-1003 Connector uses two pieces to form a secure mechanical connection between two Printed Circuit Boards (PCBs). The male pin is inserted into a female socket on the PCB and the plastic hood is placed over the male pin. The hood is secured to the PCB via screws, and the two components form a reliable contact between the two boards. This allows for electrical signals to be passed between the two components.

Installation

The installation of the 3314-1003 Connector requires precision and careful procedure due to the tight tolerances in which the devices must be installed. It is important to use a small screwdriver to fasten the plastic hood to the correct spot on the PCB. After the hood is firmly secured, the male pin must be inserted into the female socket and the two components must be aligned correctly. Cable strain relief must also be secure in order to protect the cable connections from damage.

Conclusion

The 3314-1003 Connector provides reliable electrical connectivity between two printed circuit boards in a wide range of applications. Its simple design makes it a cost effective solution, while its limited number of pins and limited flexibility should be considered when utilizing this type of connector. When properly installed, the 3314-1003 can provide reliable connections in a variety of applications.