334-40-120-00-050000

Rectangular connectors form an integral part of the electronic system. From data stream transfer to routing signals, the connectors are on the integral base of keeping a complex electronic system up and running. These connectors are usually embedded in an enclosure and have metal contact pins. Headers and specialty pins are an integral part of the electronic board to direct current or signals.The 334-40-120-00-050000 is a rectangular connector header and it also counts as a specialty pin. This device comes with a 2 position and is black in its physical appearance. It is an ATE compatible header and comes with 0.100” centerline spacing. Let us explore the application field and working principle of this amazing device.The 334-40-120-00-050000 is primarily used to route signals from one component to another on the same board. The 2 position header comes with pins that need to mate up in order to complete the circuit. This connector can also be used to insert test leads in order to monitor the signals, etc. In a nutshell, this device helps to direct the signal flow within an electronic board without letting it affect the circuitry.The working principle of the 334-40-120-00-050000 is based on the metal contact pins that the header comes along with. Each pin is designed with a carefully calibrated spring force so that the mated connection do not loosen due to the constant vibration of the board. These contact pins when pressed in, creates the necessary electrical connection within the board and the signal starts flowing.In conclusion, the 334-40-120-00-050000 is a rectangular connector header and specialty pin. These device is primarily used to route signals from one component to another or to monitor it by inserting test ports. These pins, when mated creates an electrical connection and the signal starts to flow. It comes with a 2 position, 0.100” centerline spacing and is black in its physical appearance.