353NB6A400T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are one of the most basic types of circuit components. Oscillators are used to generate a periodic electrical signal that can be used to apply a desired frequency of operation to a specific system. One type of oscillator is the 353NB6A400T, which is a CMOS oscillator that is used frequently in low voltage, high frequency applications and data communications. The 353NB6A400T oscillator is a voltage-controlled oscillator (VCO) IC that is specifically designed for use in low voltage, high frequency applications and data communications. This type of oscillator is used in a variety of applications such as computer systems, servers, cell phones, and other electronic equipment. The 353NB6A400T oscillator works on the principle of frequency modulation. This means that the frequency of the oscillator is determined by the input voltage. When the input voltage changes, so does the output frequency. This makes the oscillator very accurate and reliable. The oscillator uses a feedback loop to control the output frequency. The input voltage is connected through a series of capacitors and resistors to the output frequency. The output frequency then changes according to the value of the input voltage. The oscillator has three control pins, which are used to set the desired frequency. These control pins are the VCO pin, set pin, and the reset pin. The VCO pin is connected to the input voltage and is used to set the frequency range. The set pin is used to set the desired frequency of the oscillator and the reset pin is used to reset the oscillator’s frequency to the desired value. The 353NB6A400T oscillator is ideal for applications where the frequency needs to be precise and reliable. By using the oscillator, system designers can ensure that their system will operate correctly and reliably. The oscillator can also be used to generate a signal for encoding and decoding purposes. The performance of the 353NB6A400T oscillator is excellent. It has an operating frequency range of 78MHz to 880MHz and can handle input voltages up to 5.5V. It is also highly reliable, with a temperature coefficient of only -1.5ppm/C and a phase noise performance of -115dBc/Hz at 1KHz offset. The output voltage is usually around 2.5V.Overall, the 353NB6A400T oscillator is a very reliable and accurate oscillator, ideal for applications that require precise and reliable frequency control. The oscillator\'s low voltage and high frequency performance make it an ideal choice for applications such as computers, servers, and cell phones, as well as other electronic equipment.

The specific data is subject to PDF, and the above content is for reference