Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	30mA
Operating Temperature:	-10°C ~ 60°C
Series:	353
Voltage - Supply:	5V
Output:	HCMOS
Function:	Enable/Disable
Frequency:	24.5454MHz
Type:	VCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic device that produces a steady signal of a continual frequency, that is used as a source of electrical energy, usually a wave form generated by an alternating current. Oscillators are widely used in many different applications, from electrical engineering to communication and audio products. One such oscillator is the 353SB6A24FT oscillator. This article will discuss the application field and working principle of the 353SB6A24FT oscillator. The 353SB6A24FT oscillator has a wide range of applications, from small devices to large industrial applications. In small devices, it is used to generate signals for digital and analog components such as microprocessors and other integrated circuits. It is also widely used in industrial applications, such as motor drives, AC power control, timing control systems, and others. The 353SB6A24FT oscillator consists of an input, an output, and a control circuit. The input of the oscillator is a square wave that is applied to the control circuit. This wave is then converted into an alternating current, which is then applied to the output. The output of the oscillator is then regulated by the control circuit, which adjusts the frequency of the alternating current according to the input square wave.The control circuit of the 353SB6A24FT oscillator consists of two components: a voltage-controlled oscillator (VCO) and a digitally controlled oscillator (DCO). The VCO is used to control the frequency of the alternating current, while the DCO is used to control the amplitude of the alternating current. The VCO is also responsible for ensuring the correct phase relationship between the input waveform and the output waveform. The DCO is used to control the amount of power consumption of the oscillator, as well as the amplitude of the output.The working principle of the 353SB6A24FT oscillator is based on the use of a negative feedback loop. The input waveform is fed into the control circuit, which then adjusts the frequency and amplitude of the alternating current according to the input waveform. A portion of the output of the oscillator is then used as feedback, and this feedback is used to adjust the frequency and amplitude of the alternating current. The process is repeated until the desired output is obtained. The 353SB6A24FT oscillator is a versatile device that is used in many different applications. It can be used for both digital and analog applications, and is capable of producing high frequency signals. The oscillator is also capable of controlling the frequency and amplitude of the alternating current, making it a very useful tool for controlling AC power. The oscillator is also capable of regulating the power consumption of the device, while still producing higher frequencies. Overall, the 353SB6A24FT oscillator is a very useful tool for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description