353TB5I194R

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	25mA
Operating Temperature:	-40°C ~ 85°C
Series:	353
Voltage - Supply:	2.5V
Output:	HCMOS
Function:	Enable/Disable
Frequency:	19.44MHz
Type:	VCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits that generate an alternating, or alternating current waveform. By definition, these signals oscillate, or switch back and forth, between two voltage levels. They can also be described as producing a periodic signal with a frequency that is determined by the electrical components or circuit parameters. These electronic circuits have many uses, from providing a timing reference in digital circuits, to direct current modulation or control. One specific type of oscillator is the 353TB5I194R oscillator. It is an integrated analog oscillator specifically designed for both frequency and voltage control. This oscillator uses a combination of a voltage controlled oscillator (VCO) and a frequency divider. The VCO is used to generate a clock signal with a certain frequency, while the frequency divider is used to divide the frequency produced by the VCO to produce different output frequencies. The 353TB5I194R oscillator can be used for both voltage control and frequency control and is used in various applications such as the generation of control signals, the production of timing signals, and even as a frequency source for remote control applications. The application field of the 353TB5I194R oscillator can vary depending on the application, but generally it is used for the production of control signals for digital circuits, the generation of timing signals, and the generation of remote control signals. For digital circuits, the oscillator can be used to generate a control signal for the microcontroller, such as a Start/Stop signal. The microcontroller can then use the signal to proceed with the program. For timing signals, the oscillator can be used to produce an output signal with a certain periodicity. This can be used to produce a signal for an interrupt or for a timing loop. For remote control applications, the oscillator can be used to produce a remote control signal with a certain frequency and amplitude. This signal can be used to control a remote device, such as a robotic arm. The working principle of the 353TB5I194R oscillator is based on the use of a voltage controlled oscillator (VCO) and a frequency divider. The VCO produces a signal with a certain frequency, which is then divided by the frequency divider into different frequencies to produce the desired output signal. The frequency of the signal generated by the VCO is controlled by the voltage applied to the VCO. As the voltage is increased, the frequency of the signal generated by the VCO is increased, and as the voltage is decreased, the frequency of the signal generated by the VCO is decreased.The output frequency of the 353TB5I194R oscillator can also be adjusted using the frequency divider. The frequency divider is used to divide the frequency generated by the VCO into different output frequencies. The output frequency of the oscillator is determined by the divider ratio, which is the rate at which the frequency of the VCO is divided. The output frequency of the oscillator can be adjusted by changing either the divider ratio or the voltage applied to the VCO. In summary, the 353TB5I194R oscillator is an integrated analog oscillator specifically designed for both voltage and frequency control. Its application fields include the production of control signals for digital circuits, the generation of timing signals, and the generation of remote control signals. The working principle of this oscillator is based on the use of a VCO and a frequency divider. The voltage applied to the VCO controls the frequency of the signal generated by the VCO, while the frequency divider is used to obtain the desired output frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description