353VB3C283R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is a device that is used to generate repetitive signals. It is a key component in many electronic, electromechanical, and control applications. The most common use of an oscillator is to produce an AC sine wave signal, which can be used to drive various electrical and electronic circuits. The most common types of oscillators are analogue oscillators, digital oscillators, and oscillators based on switched-capacitor technology.

353VB3C283R Application Field and Working Principle

The 353VB3C283R oscillator is a voltage-controlled low-power oscillator that uses a voltage-to-frequency conversion technique. It is designed primarily for use in control and timing applications. It can interface with digital logic circuits and analog circuit blocks such as amplifiers and transistors. It is available in a wide variety of packages including surface mount, through-hole, and miniature designs.

The 353VB3C283R oscillator has two operating modes, the low power mode and the high power mode. In the low power mode, the oscillator draws a nominal current of 8 mA and uses a fixed frequency reference and a programmable duty cycle. In the high power mode, the oscillator draws a nominal current of 25 mA and uses a variable voltage input and variable duty cycle. The oscillator output is a constant frequency square wave with a programmable on and off period.

The basic operating principle of the 353VB3C283R oscillator is a voltage-controlled technique called VFC. In VFC, a low voltage input is applied to the oscillator and the frequency of the output is proportional to the magnitude of the voltage. The VFC circuit consists of a voltage source, a pair of differential amplifiers, and an RC oscillator. The voltage source charges the capacitor connected to the differential amplifier which in turn drives the RC oscillator circuit. The voltage on the capacitor varies with the input voltage, and in turn, the frequency of the RC oscillator is altered. When the capacitor is at it’s lowest voltage, the RC oscillator is at its maximum frequency and the charge/discharge time is at the maximum duty cycle.

The 353VB3C283R is designed for low noise, low output-skew applications. It has an input clock voltage of 3.3V and an output frequency range of 0.3MHz to 126MHz. The typical output rise and fall times are 20ns and 40ns, respectively. It features fast start-up and shutdown times and is available in both surface mount and through-hole packages.

The 353VB3C283R oscillator can be used in a variety of applications such as motor control, timing, and logic circuits. It is cost-effective and reliable, making it ideal for use in small systems. Furthermore, it is robust and can withstand harsh environments such as those associated with automotive and consumer applications.

The specific data is subject to PDF, and the above content is for reference