353WB3A34AR

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	30mA
Operating Temperature:	-10°C ~ 60°C
Series:	353
Voltage - Supply:	5V
Output:	HCMOS
Function:	Enable/Disable
Frequency:	34.56MHz
Type:	VCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: 353WB3A34AR Application Field and Working Principle

Oscillators are electrical components that are widely used in electronic circuits for producing periodic or repetitive signals. The most common type of oscillator is an analog oscillator, which consists of an active element and a passive element. The active element is typically a transistor, diode, or operational amplifier, and the passive element is usually an inductor or capacitor. This type of oscillator is used in a variety of applications such as clocks, alarms, radio-frequency oscillators, amplifiers, audio oscillators, and others.The 353WB3A34AR oscillator is a type of analog oscillator that uses a bipolar transistor as the active element. It is commonly used in applications such as frequency modulation (FM) receivers, microwave receivers, and digital signal processor (DSP) applications. The primary benefit of this particular type of oscillator is its relatively short current consumption and high stability over a wide temperature range.This oscillator is composed of several components. It consists of a transistor, a biasing network, a passive element, and a pair of voltage-controlled resistors. The transistor is the active element, while the biasing network acts as a voltage regulator. The passive element is usually either an inductor or a capacitor, and the voltage-controlled resistors are used to adjust the gain of the oscillator.The working principle of the 353WB3A34AR oscillator is based on a feedback loop. The biasing network supplies the transistor with a constant bias voltage, which allows the transistor to remain in a “constant on” state. The input signal is applied to the transistor\'s emitter, which controls the current flow in the circuit. This current flow creating a voltage drop across the resistor, and the voltage-controlled resistors adjust the gain. This loop produces an oscillating signal with a frequency that is determined by the values of the passive elements and the biasing network.The 353WB3A34AR oscillator is used in a variety of applications due to its low power consumption and high stability. These applications include wireless communication systems, satellite communication systems, radio communication systems, navigation systems, and television broadcast systems. It is also used in DSP applications such as audio filtering and noise reduction.Overall, the 353WB3A34AR oscillator is a useful component in a variety of electronics and communications applications. Its low power consumption and high stability make it an ideal option when long-term reliability and accuracy are paramount. Its feedback loop design also makes it easy to adjust the gain to achieve the desired signal frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description