35HDRAAU

Barrel - Audio Connectors provide the essential link between audio-producing devices and audio-consuming devices. They provide the necessary connection that allows sound to travel from one device to another. The most common Barrel - Audio Connectors connectors are 1/4 inch (6.35mm) and 3.5mm. Each of these connectors can variouslybe configured as either a single-pole mono (TS) or stereo (TRS).

The 35HDRAAU application field and working principle is thatof a coaxial cable-mounted connector, which is designed for use in the broadcast television (BTV) industry. This type of connector is normally used with small diameter RG6 Quad Shield coaxial cables, capable of carrying a maximum frequency range of 5GHz. It is specifically designed to provide an RF signal path between BTV components and devices, such as between transmitters/receivers, cameras, control rooms, modulators, receivers, and antenna systems.

The pinout for the 35HDRAAU is provided as follows. It is a three-pin RF connector, comprising a threaded cable from the connector body/collar to a single RF pin and two matched ground pins. The common conductive lug is the RF pin, which would be connected to the centerwire of the coaxial cable. The two ground pins would then be soldered or crimp-connected to the cable’s braid.

In terms of the working principle, the Barrel - Audio Connectors was developed to offer a low-loss and highly reliable RF connection for BTV equipment. As the wires of the small diameter RG6 Quad Shield coaxial cable are covered with an extra-thick shield, the 35HDRAAU provides greater signal integrity while also protecting against outside interference. Additionally, due to its threaded collar, the connector is able to retain a secure connection when mounted in a variety of materials, thus also reducing the risk of signal loss or disruption.

Aside from its application within the broadcasting industry, the 35HDRAAU is also designed to be backwards-compatible with 1/4 inch (6.35mm) and 3.5mm type audio connectors. By virtue of its specialized design, the 35HDRAAU provides improved audio quality and signal strength when connected to audio-producing and consuming devices. This makes it suitable for use in a variety of audio applications.

In conclusion, the 35HDRAAU application field and working principle is that of a coaxial cable-mounted connector designed specifically for use in the broadcast television (BTV) industry. The connector is capable of providing an RF signal path of up to 5GHz, and is also forward- or backwards-compatible with 1/4 inch and 3.5mm audio connectors in order to ensure improved audio quality between connected devices. Ultimately, Barrel - Audio Connectors of this type provide the necessary link to allow audio to travel between audio-producing and consuming equipment.