36157

Termination:	Crimp
Material - Insulation:	Polyamide (PA), Nylon
Insulation Diameter:	0.105" ~ 0.150" (2.67mm ~ 3.81mm)
Contact Finish:	Tin
Contact Material:	Copper
Color:	Blue
Features:	Serrated Termination
Insulation:	Insulated
Wire Gauge:	14-16 AWG
Series:	PIDG
Mounting Type:	Free Hanging (In-Line)
Length - Overall:	0.859" (21.82mm)
Width - Outer Edges:	0.343" (8.71mm)
Thickness:	0.031" (0.79mm)
Stud/Tab Size:	6 Stud
Terminal Type:	Circular
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminals - Ring Connectors

Ring connectors are one of the most common types of electrical terminal connectors. These terminals are shaped like a ring, hence their name. They are typically used to connect two pieces of electrical wiring in a variety of applications. Ring connectors are generally used when two wires need to be securely connected without the risk of either being lost or pulled apart due to fatigue.Ring connectors come in a variety of sizes to accommodate different types of wiring. The size of the connector will depend on the size of the electrical wiring being used. For instance, a larger connector is necessary for larger wires. The smaller connectors are typically used for lighter gauge wires.The type and size of the connector will also depend on the type of application it is being used for. For instance, a larger connector may be necessary to connect several different types of wires. Additionally, smaller connectors may be used to connect wires that will have a higher electrical current than larger connectors.When selecting ring connectors, it is important to determine the type and size of the connector that will best meet the current application. There are three main types of ring connectors: braided, split ring, and solid-state. Each type has its own unique advantages and disadvantages. Braided ring connectors are generally the most cost-effective and easy to install. Split ring connectors are slightly more expensive, but are less likely to become damaged through normal use. Lastly, solid-state ring connectors are the most reliable, but they are also the most expensive.To ensure a reliable connection, it is important to properly terminate the ring connectors. If the ends of the wires are not properly terminated, it may cause the connector to become loose or disconnected. Before connecting the wires to the ring connectors, the bare ends of the wires must be stripped back to ensure maximum contact with the rings. The wires should then be crimped or soldered into place.It is important to ensure that the connectors are properly aligned before they are tightened. The interior of the ring must be free of any sharp edges or burrs to allow for a better contact. Additionally, it is important to check that the connectors are all the same size to prevent any electrical problems.Once the connectors are installed, it is important to periodically check them for any wear or signs of damage. The metal should be free from corrosion and the terminals should not be allowed to come into contact with liquid. Additionally, it is important to inspect the connectors for any signs of overheating or fatigue. If any of these issues are present, it is best to replace the connector immediately.Ring connectors are widely used in a variety of electrical applications, ranging from small electronics to industrial manufacturing. They are relatively easy to install and can provide reliable connections with minimal maintenance. Additionally, due to their wide range of sizes and configurations, these connectors can be used for almost any type of wiring.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description