3615A102K

DC Resistance (DCR):	16.5 Ohm Max
Height - Seated (Max):	0.209" (5.30mm)
Size / Dimension:	0.512" L x 0.197" W (13.00mm x 5.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	790kHz
Operating Temperature:	-55°C ~ 100°C
Ratings:	--
Frequency - Self Resonant:	2.5MHz
Q @ Freq:	60 @ 790kHz
Series:	3615, Sigma Inductors
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	118mA
Tolerance:	±10%
Inductance:	1mH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Fixed inductors, also known as inductors, are passive electronic components composed of a wire coil, often wound around an iron core. They are used to store electric energy temporarily and block direct current (DC) while allowing alternating current (AC) to pass, and are the common components of many electrical circuits. This article focuses on the application field and working principles of the 3615A102K inductor.

Application Field

The 3615A102K inductor is a specialized type of inductor that is useful for a variety of applications, especially in circuits with limited space. It is often used as a filter in radio frequency receivers, as a stepping motor in robotics, in switching power supplies and uninterruptible power supply systems, and for power factor correction. It is also often used in audio and signal processing applications.The 3615A102K inductor is also often used for decoupling applications. These inductors are ideal for decoupling power supply lines, providing frequencies up to 1.3MHz. This allows for better signal quality and more efficient operation of the circuit.

Working Principle

An inductor works in a similar way to a capacitor, but with an important distinction. An inductor does not allow a direct current (DC) to pass, but instead acts to oppose a change in the current that is flowing through it. This is known as the inductance, and is measured in units called henries.The basic principle of an inductor is based on the principle of magnetic flux. An inductor consists of a coil of wire that creates a magnetic field when current flows through it. When current is applied to the coil, the resulting magnetism creates an opposing force that “opposes” the original current that is passing through the coil. This opposing force is called inductance, and it is this property that makes an inductor a powerful component in many electrical circuits.The 3615A102K inductor is a specialized type of inductor designed for high current applications. It is built with a high-purity iron core that increases its inductance while still allowing high currents to pass through it. The core is also encased in a special epoxy to help prevent shorting and arcing.

Conclusion

The 3615A102K inductor is a specialized type of inductor that is useful for a variety of applications. It is often used for power factor correction, signal processing, and decoupling applications, as well as for filter applications in radio frequency receivers. It works on the principle of magnetic flux, where an opposing force is created when current flows through the coil, which is known as inductance. It has a high-purity iron core which increases its inductance, and is built with a special epoxy to prevent shorting and arcing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description