399-10-120-10-009000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors - Headers, Male Pins

Rectangular connectors are one of the most common users of connectors because of their small size, ease of wiring, and cost efficiency. The wires are connected via electrical pathways with the connectors providing an attached housing which to protect the wires from dirt, dust, and other substances. One of the most versatile of the rectangular connector types is the 399-10-120-10-009000, commonly referred to as the ‘header’ or ‘male pin’.

The 399-10-120-10-009000 is a two part male and female pin-type connector. The male connector contains two sets of pins, one for power and one for control, while the female connector contains two female electrical contacts. These pins are then mated together and all tailed and soldered to form a connection. The terminals are often covered with a protective sleeve or boot which is designed to provide additional strain relief and prevent accidental disconnection.

In terms of performance, the 399-10-120-10-009000 offers improved connections over traditional crimping methods due to their smaller size and the higher current ratings that they offer. They are also much easier to work with as they are more stable when dealing with vibrations and frequent manipulation. Furthermore, they are much better at distributing current as the small pins are better able to distribute energy across a wide range of surface area.

In terms of applications, the 399-10-120-10-009000 is most commonly found in automotive applications, such as in the engine compartment or on the interior wiring harness. However, it can also be found in a wide range of industrial and consumer electronic applications such as in the construction of computers, phones, TVs, radios, and countless other consumer electronic devices.

In terms of working principle, the 399-10-120-10-009000 utilizes an electrical pathway that runs from the female contact of the header to the male contact of the male pin. This electrical signal is then fed into the pin itself and is then distributed across the pins that make up the header. As the voltage is moved from the female contact to the pins, the current is distributed accordingly and thus the circuit is complete.

The 399-10-120-10-009000 header and male pin connector can be used in a wide range of applications and they offer superior performance compared to traditional crimping methods. They are ideal for providing reliable and durable connections due to their small size and high currents, making them ideal for applications that require frequent vibrations and manipulation.

The specific data is subject to PDF, and the above content is for reference