3SBC2011A2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 3SBC2011A2 is a signal relay which can handle up to 2 amps. It is an ideal solution for applications requiring the switching of low current loads such as LEDs, relays, solenoids, or any low power device.

3SBC2011A2 has several features which make it suitable for such applications. It has a maximum contact rating of 2A at 125VAC and 1A at 250VAC. It is capable of handling a wide variety of signal voltage ranges up to 280VAC. It has a built-in optical isolation for improved safety. It also has a short circuit protection device to prevent damage due to circuit overload.

In addition to handling low current loads, 3SBC2011A2 also has a variety of features which make it suitable for industrial and commercial applications. It has a wide operating temperature range of -30 to +70°C, making it suitable for harsh environments. The relay also has a wide on/off time range, making it suitable for applications requiring precise timing. It is also UL listed, guaranteeing it meets the highest safety requirements.

The 3SBC2011A2 operates on a contact mode principle. This means that when a signal voltage is supplied to the input, the relay will switch the output contacts on or off, thereby controlling a connected load. When the signal voltage is removed, the relay will stop controlling the load and return to the unenergized state. This type of relay can be used for a variety of switching applications including the switching of low current loads such as LEDs, relays, and solenoids.

The 3SBC2011A2 is an ideal solution for applications requiring the switching of low current loads. Its features make it suitable for a variety of industrial and commercial applications. Its contact mode operation makes it suitable for switching applications. With its UL listing and wide temperature range, it guarantees safety and reliability.

The specific data is subject to PDF, and the above content is for reference