4-1932000-8 Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory Connectors - Inline Module Sockets are one of the most versatile and used connectors in the electronics industry today. These connectors are used in a wide variety of applications, from data transfer to power distribution. They are also the backbone of many integrated circuits (ICs), allowing for communication between the IC and external devices such as resistors and capacitors.

The most common type of Memory Connectors - Inline Module Socket is the 4-1932000-8. This is a two-pin, mezzanine connector with an 8-bit wide bus. It is designed to accommodate either full 8-bit Micro-Schematic extension wires or single 4-bit Micro-Schematic extension wires. The 4-1932000-8 can be used as an interface between ICs and other components, or it can be used in daisy-chain applications, such as clocks and buses.

The use of 4-1932000-8 as a memory connector specifically designed for memory applications is one of its most important applications. This type of connector allows the connection of an IC to an external DRAM or SRAM memory chip. It can also be used for ECC or parity bits to make sure the data is properly read and stored in the memory. Consequently, this type of connector is a fundamental component of electronic systems, such as computers.

In terms of pinout, the 4-1932000-8 has two lines, one for data and the other for address. The 8-bit wide bus allows for a total of 8 addresses on the chip. Each address is associated with a specific data line. These pins are connected to a separate memory-buffer register on the IC, which is responsible for making sure the data from memory is transferred correctly. The data and address lines from the register are then sent back to the memory for the read/write process.

The working principles of the 4-1932000-8 are relatively simple. The data and address lines are sent to the IC\'s custom memory-buffer register, which then forwards them to the memory chip. The registers on the IC accept data from the memory chip and forward them back to the memory. If more than one memory is needed, the registers can link together multiple memory chips in order to increase the memory capacity. This type of design is widely used in computers and embedded systems.

In summary, Memory Connectors - Inline Module Sockets, such as the 4-1932000-8, is a key component of many electronic systems. It is used extensively in the electronics industry for data transfer, power distribution, and memory applications. The 4-1932000-8 is a two-pin mezzanine connector with an 8-bit wide bus, which allows for 8 addresses on the chip. Its working principles are relatively simple, with data and address lines being sent to the IC\'s memory-buffer register. The register then forwards the data back to the memory chip. This type of memory connector is essential for ensuring data is properly stored and retrieved.

The specific data is subject to PDF, and the above content is for reference