4-6437146-9

Series:	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	Flexstrip
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	20
Pitch:	0.100" (2.54mm)
Length:	5.000" (127.00mm)
Length - Exposed Ends:	0.125" (3.18mm)
Termination Style:	Completely Exposed Wires on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex, Ribbon Jumper Cables—4-6437146-9 Application Field & Working Principle

Flat flex, ribbon jumper cables are a type of electrical wiring medium that is used for connecting two different pieces of equipment within a certain circuit. They are often used in place of more complex wires and connectors, as they are easier to use, cheaper to produce, and have a better connection than traditional wiring systems. In addition, these cables are very reliable in providing a safe and secure connection between two pieces of equipment.4-6437146-9 Flat Flex Ribbon Jumper Cables are typically used in smaller, low-power applications, such as in the automotive industry. They are used to connect two pieces of equipment, often to enable a certain signal or control to pass between them. As they are very flexible and lightweight, their installation process is relatively easy and quick.The basic construction of 4-6437146-9 Flat Flex Ribbon Jumper Cables consists of a continuous strip of flat flexible dielectric material with a printed conducting ribbon running between two parallel side-by-side conductors. Each of the conductors is insulated and the whole system is then covered by a protective jacketing material. The dielectric strip is usually made of a low ESR material such as polyamide or polyester and the ribbon is usually made of coiled copper or silver.When installing the flat flex ribbon jumper cables, the first step is to determine the length of the flat flex strip needed. This length must be determined by the equipment that will be connected to each other and the frequency that the system will be operating at. After the length is determined, the next step is to determine the number of wires needed for the connection. This will depend on the type of signal or control that will be transmitted. Once the number of conductors has been determined, the ribbon jumper cables can be connected to the equipment using crimp terminals, which are designed to provide a secure connection.Once these connections have been made, the final step is to attach the protective metal jacketing material. This material is necessary to provide additional protection to the flat flex cable from the elements and to reduce the chance of any short circuits occurring. When the jacket has been fitted, the flat flex ribbon jumper cables are ready to be used.Flat Flex, Ribbon Jumper Cables 4-6437146-9 can provide a secure and reliable connection between two pieces of equipment. They are easy to install and are a cost effective solution for low-power applications. However, it is important to ensure that the length of the ribbon is correct and that the correct number of conductors is used so that the connection is secure and that there is no risk of short circuits occurring.

The specific data is subject to PDF, and the above content is for reference