Allicdata Part #: | 4-6609089-7-ND |
Manufacturer Part#: |
4-6609089-7 |
Price: | $ 3.69 |
Product Category: | Filters |
Manufacturer: | TE Connectivity Corcom Filters |
Short Description: | LINE FILTER 250VAC 16A CHASS MNT |
More Detail: | N/A |
DataSheet: | 4-6609089-7 Datasheet/PDF |
Quantity: | 1000 |
36 +: | $ 3.35230 |
Series: | WG |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | 250V |
Current: | 16A |
Frequency - Operating: | 50/60Hz |
Applications: | General Purpose |
Approvals: | CSA, UR, VDE |
Operating Temperature: | -10°C ~ 40°C |
Mounting Type: | Chassis Mount |
Termination Style: | Quick Connect, Threaded Post (M8) |
Inductance: | 1.3mH |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules, commonly referred to as 4-6609089-7, are instruments that help reduce electrical interference from power lines. By providing a low pass filter, or LPF, they help ensure that signals from power lines and electric appliances are not distorted and remain noise-free. This can be achieved by filtering out frequencies that are not needed, thereby offering a stable line of interference and reducing line noise.
The 4-6609089-7 has wide application areas, such as industrial products, consumer electronics, computer systems, medical equipment and home appliances. The module is designed to provide a high level of filtering performance in order to minimize the amount of interference that affects electrical systems. It is also used to reduce the EMC interference in the area and ensure that the system runs smoothly.
The working principle of 4-6609089-7 is based on the fact that electric interference is made up of various frequencies, which are subject to attenuation depending on the filter type used. It uses an array of filters to attenuate noises at different frequencies. The most common filter types used in the 4-6609089-7 module are low pass filters, bandpass filters, capacitor-based filters, and inductor-based filters. The filter is designed to attenuate the unwanted frequencies, while still allowing the signal to get through.
Low pass filters are designed to attenuate frequencies that are higher than the cut-off frequency. High frequencies, such as those from power lines, will be blocked out, while allowing the frequencies below the cut-off frequency to pass through.
Bandpass filters are designed to attenuate frequencies that are lower than the cut-off frequency, and above the cut-off frequency. In this case, the signal will be filtered out, allowing only those frequencies between the two cut-off frequencies to pass through.
Capacitor-based filters are designed to attenuate frequencies by using a series of capacitors. These filters will reduce unwanted frequencies, while allowing those that are below the cut-off frequency to pass through.
Inductor-based filters are designed to attenuate frequencies by using a series of inductors. These filters will reduce unwanted frequencies, while allowing those frequencies below the cut-off frequency to pass through.
The 4-6609089-7 module is designed to provide effective and reliable power line filtering. It is a cost effective solution that ensures a stable power line and reduces noise. This module is capable of providing effective and reliable line filtering even in environments with high levels of electric interference and can ensure that the power lines are noise-free.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT