40-CBSA-1.75X2.75X0.4

Series:	40-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.400" (10.16mm)
Length - Overall:	2.750" (69.85mm)
Width - Overall:	1.750" (44.45mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to RF Shields and 40-CBSA-1.75X2.75X0.4

RF (Radio Frequency) shield is a type of EMI (electromagnetic interference) shield which shields a device from an electromagnetic field. It is mainly used to protect RF devices which transmit and receive signals from outside interference. The most common type of RF shielding is copper foil which is conductive and can be used to block Radio Frequency (RF) waves from entering or leaving the device that it is covering. The specific RF shield referenced in this article is the 40-CBSA-1.75X2.75X0.4.

Application Field and Working Principle of 40-CBSA-1.75X2.75X0.4

The 40-CBSA-1.75X2.75X0.4 is a small, lightweight, and flexible shield specifically designed for use on small electronic components such as antennas, connectors, printed circuit boards, and serial interfaces. This RF shield is typically used to protect these components from RF interference while still allowing the use of high gain antennas. The working principle behind the 40-CBSA-1.75X2.75X0.4 is that the copper foil material blocks the transmission of RF signals while allowing the components such as antennas or connectors to transmit.The 40-CBSA-1.75X2.75X0.4 is designed to reduce or eliminate RF interference on small, sensitive components. It can be used in many applications such as cell phones, Wi-Fi routers, RFID tags, GPS receivers, and satellite receivers. The 40-CBSA-1.75X2.75X0.4 is often used to reduce unwanted noise and improve signal quality. It can also be used to protect components from RF radiation from nearby sources, such as a cell tower or power line.

Installation

The 40-CBSA-1.75X2.75X0.4 is easy to install and can be applied directly to the component that needs to be shielded. The shielding material must be attached securely to make sure there are no gaps or air pockets between the component and the shield. Once the shield is securely attached to the component, the RF signal will be blocked from entering or leaving the component.

Benefits of 40-CBSA-1.75X2.75X0.4

The 40-CBSA-1.75X2.75X0.4 is a lightweight, flexible shield that provides reliable RF protection to small electronic components. It is also very easy to install and can be applied to almost any component. By reducing or eliminating RF interference, this shielding material can improve the performance of the shielded components and reduce power consumption. Additionally, the 40-CBSA-1.75X2.75X0.4 can also protect the components from radiation and other harmful signals.

Conclusion

In conclusion, the 40-CBSA-1.75X2.75X0.4 RF shield is a lightweight, flexible, and easy to install shielding material which helps to protect small components from interference and environmental hazards. This shield can reduce or eliminate RF interference, improve signal quality, and reduce power consumption. By using the 40-CBSA-1.75X2.75X0.4 RF shield, you can protect your components and improve the performance of your system.

The specific data is subject to PDF, and the above content is for reference