4014C-6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Directional Couplers are used in a wide range of applications that require transmission of high frequency signals between two points. These couplers are used to couple or isolate signals from one point to another, and can be used to measure power, signal level, and noise in a communication system. The coupling of the signal from one point to another results in a predictable response pattern, making the couplers ideal for use in antenna and communication system tests.

The 4014C-6 is an RF Directional Coupler that is a low-cost, wide-bandwidth, high-accuracy device specifically designed for high frequency communication systems. The 4014C-6 has two directional coupler ports, labeled A and B, that are designed to couple a signal from one port to the other in either a forward or reverse direction, depending on the frequency of the signal. The 4014C-6 also includes two ports, labeled C and D, for measurement of forward and reverse signal levels.

The 4014C-6 is typically used in two common applications - signal measurement and antenna system tests. For signal measurement, the 4014C-6 is used to couple a signal from one port to another, and then measure the forward and reverse signal levels at the C and D ports. This allows for accurate measurement of signal levels, and is especially useful for verifying system performance in areas where signals are expected to be weak or distorted.

In antenna system tests, the 4014C-6 is used to measure the radiation power pattern of antennas with a high degree of accuracy. This is commonly done by first connecting the 4014C-6 between the transmission line and the antenna. Then a signal is applied to Port A of the 4014C-6, and the forward and reverse signals are measured at the C and D ports. This allows the antenna\'s gain and radiation pattern to be calculated and compared against expected results.

The working principle of the 4014C-6 is based on the law of electromagnetic induction. When a signal is applied to Port A, an electromagnetic field is created, which induces a current in the coupler’s internal winding (the “coupled” or “coupler” winding). This current generates its own electromagnetic field, which causes a signal at Port B. Similarly, a signal applied to Port B causes a current to flow in the reciprocal winding which results in a signal at Port A. In addition, the current in the winding is measured, allowing the forward and reverse signal levels to be determined at the C and D ports. This process allows the 4014C-6 to accurately measure a signal in a forward or reverse direction over a wide range of frequencies.

The 4014C-6 is a highly versatile and reliable RF Directional Coupler that can be used in a variety of applications where the directional characteristics of the signal must be measured accurately. It is an excellent choice for antenna and communication system testing, as well as for making accurate signal measurements in weak or distorted areas. The 4014C-6’s low cost and wide bandwidth make it an attractive option for a wide variety of high frequency communication systems.

The specific data is subject to PDF, and the above content is for reference