410-43-252-61-105000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Sockets for ICs and transistors are components used in electronics to enable the safe and effective connection of other components such as integrated circuits (ICs) and transistors to a circuit board. The common type of socket for ICs and transistors has the code number 410-43-252-61-105000 and is made up of a plate or socket body, pins and often a locking mechanism to secure the connection.

The purpose of an IC or transistor socket is to enable a reversible connection of the components to the circuit board which leads to flexibility in the design and also helps to protect the components during soldering or repair. By connecting these components through a socket rather than soldering a permanent connection it is far easier and more cost effective to make changes or repairs to the circuit board.

The IC socket is connected to the circuit board by soldering the pins of the socket to the pads on the board, typically in a two-step process using a drag or wave soldering machine. Then the IC or transistor is seated and locked into place in the socket. This can be done manually or mechanically with a tool.

The 430-43-252-61-105000 socket has pins arranged in a single row at an 8-pin spacing or gap. The ‘8-pin’ designation refers to the eight pins being spread across the entire surface of the socket. A single row version may accommodate 20, 24, 28 or 32 pins, and multiple rows of 8-pin segments are available for larger pins counts. The pitch (space between pins) is usually 0.1 inch, although alternate pitches are available.

The design of the 431-43-252-61-105000socket is such that when an IC is inserted into place, a gap is created between the IC package and the socket. This gap is known as the shoulder of the socket and its purpose is to prevent shorts by forcing the insertion of IC leads into the correct holes. Once an IC is placed in the socket, the locking mechanism can be engaged to secure the connection.

When choosing a socket for a particular IC, care must be taken to ensure that the correct voltage and waveform requirements of the IC are met. The standard voltage range of the 431-43-252-61-105000 socket is 5, 12 and 24 Volts with a maximum current of 40 Amps. The Waveform Ratings are type I for 4.1-5 kHz, type II for 7.2-13 kHz, type III for 16-36 kHz, and type IV for 45-69 kHz.

In summary, the 431-43-252-61-105000 socket is a common type of socket used in electronics to enable a safe and reliable connection of ICs and transistors to a circuit board. The sockets offers flexibility in design and protection for the components during soldering and repair. Care must be taken when selecting the right product to ensure it meets the correct voltage, waveform and pin count requirements of the application.

The specific data is subject to PDF, and the above content is for reference