4108-3DB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electronic devices which reduce the amplitude of a waveform while preserving its wave shape. Specifically, a 4108-3DB attenuator is a type of dual-stage attenuator. This guide will discuss the general application fields and working principles of this device.

What is a 4108-3DB Attenuator?

As mentioned above, 4108-3DB is a type of dual-stage attenuator. It consists of two attenuation sections: a high-impedance section and a low-impedance section. The high-impedance section has a fixed attenuation of 3dB, while the low-impedance section has a variable attenuation from 0dB to 60dB.

Applications of 4108-3DB Attenuators

4108-3DB attenuators are widely used for audio and signal conditioning applications. They are used to reduce signal amplitudes to desired levels while maintaining the waveform shape. Additionally, they are used to reduce signal power levels when connecting devices with different impedance levels. For example, they are used to reduce the signal power levels from a 70V line to a standard 8 ohm speaker.

Working Principle of 4108-3DB Attenuators

The 4108-3DB attenuator operates on the principle of resistive division. That is, the signal voltage is divided between two resistors and the output voltage will be reduced by the ratio of their values. In the high-impedance section, this division is done between the 3dB attenuator resistor and the input resistor. In the low-impedance section, the division is done between the 3dB attenuator resistor and the variable resistor.

The actual output voltage of the 4108-3DB attenuator is determined by the ratio of the resistors in each section. In the high-impedance section, the output voltage will be equal to the input voltage minus 3dB. In the low-impedance section, the output voltage will be equal to the input voltage minus the attenuation set by the variable resistor.

Conclusion

The 4108-3DB attenuator is a dual-stage attenuator consisting of a high-impedance section and a low-impedance section. It is widely used for audio and signal conditioning applications. Its working principle is based on the resistive division of the input voltage between two resistors.

The specific data is subject to PDF, and the above content is for reference