4120-V110-P1M1-Z0S0ZN-2A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A circuit breaker is an important electrical device used to protect the circuits in a building. 4120-V110-P1M1-Z0S0ZN-2A is a circuit breaker that is designed for residential applications, which may include single-phase and three-phase applications. This particular circuit breaker is also suitable for low voltage distribution systems and may be installed with a fuse and protection relays.

This circuit breaker provides protection from short circuits, overloads, and earth fault currents. It has a rated voltage of 110 V and a rated current of 1 mA. It is approved for use in three-phase applications and can handle higher currents if required. The circuit breaker is UL and CSA approved and is suitable for both commercial and residential installations.

The 4120-V110-P1M1-Z0S0ZN-2A circuit breaker is an air-break type circuit breaker which uses air as the insulating medium. This means that it is not necessary to use additional insulating material, such as oil, to provide the insulation. It is also important to note that this type of circuit breaker is not self-clearing, so short circuits must be cleared manually.

The circuit breaker works by detecting an over-current condition in the circuit. When an overload is detected, the circuit breaker trips and disconnects the circuit, thereby preventing further damage. Once the overload has been cleared, the circuit breaker can be reset to restore power to the circuit.

The 4120-V110-P1M1-Z0S0ZN-2A circuit breaker is designed for use in residential applications including single-phase and three-phase homes and buildings. It has a rated voltage of 110V and a rated current of 1mA. It is UL and CSA approved and is suitable for both commercial and residential installations. This particular circuit breaker provides protection from short circuits, overloads, and earth fault currents.

In conclusion, the 4120-V110-P1M1-Z0S0ZN-2A circuit breaker is an important electrical device used to protect the circuits in a building. It is an air-break type circuit breaker which uses air as the insulating medium and is approved for use in three-phase applications and can handle higher currents if required. It has a rated voltage of 110V and a rated current of 1mA and is UL and CSA approved and is suitable for both commercial and residential installations. The circuit breaker works by detecting an over-current condition in the circuit and then disconnecting the circuit when an overload is detected. This prevents further damage to the circuit.

The specific data is subject to PDF, and the above content is for reference