413-K14-LN1-041803-40A

Series:	413
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Thermal
Moisture Sensitivity Level (MSL):	--
Current Rating:	40A
Voltage Rating - AC:	115V
Voltage Rating - DC:	28V
Number of Poles:	1
Actuator Type:	Push-Pull Plunger
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Circuit Breakers

Circuit breakers are a type of electrical switch designed to protect electrical circuits from damage caused by excessive current. They are a safety device that trips when the current in a circuit gets too high, preventing further damage to the circuit or components. There are many types of circuit breakers, but the most common type is the 413-K14-LN1-041803-40A.

Types of Circuit Breakers

Circuit breakers are generally divided into two categories; high impedance and low impedance. Low impedance circuit breakers are designed to trip quickly when an overload occurs. This type of breaker is usually used in household circuits. High impedance circuit breakers, such as the 413-K14-LN1-041803-40A, are designed to trip more slowly and are typically used in industrial circuits and other circuits that require high currents.

413-K14-LN1-041803-40A Application and Working Principle

The 413-K14-LN1-041803-40A is a high-impedance, inverse-time circuit breaker. It is a 1-Phase, 3-pole, 240V 50A device. The 413-K14-LN1-041803-40A is designed to trip more slowly than a low-impedance breaker, allowing more current to flow before the breaker trips. This type of breaker is typically used in industrial circuits that require high currents, such as welding equipment or motor control circuits.The 413-K14-LN1-041803-40A works by sensing the rate of current rise in the circuit. When the current exceeds a certain limit, the breaker will begin to trip. As the current continues to rise, the breaker\'s trip time increases. When the current gets too high, the breaker will trip, quickly cutting off the power to the circuit.

Conclusion

The 413-K14-LN1-041803-40A circuit breaker is a high-impedance inverse-time breaker designed to provide protection in industrial circuits. It works by sensing the rate of current rise and tripping when the current rises too quickly. This type of breaker is an important safety device, and should be used in any application where high current is necessary.

The specific data is subject to PDF, and the above content is for reference