416-83-256-41-012101

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors - Headers, Receptacles, Female Sockets

416-83-256-41-012101 is a type of rectangular connector manufactured by JAE Electronics. It is part of its “MicroTec” range of products typically used for providing low profile, high-density electrical connections. This part is a Dual Row 18 pcb through-hole receptacle of the IDC type, which is suitable for ribbon cables. Electrical connections are made by means of significant input and output current via contacting that provides reliable and secure connections.

This type of product is suitable for applications in telecommunications, audio equipment, consumer electronics, networking devices, board-to-board communications, battery charging, medical electronics, and entertainment, as well as many other areas. 416-83-256-41-012101 is a perfect option for designs where there’s a need for secure and reliable connections and where board space is a premium.

This rectangular connector is able to accept a variety of ribbon cables. It uses two rows of precision-formed contacts to ensure reliable contact with the flat ribbon cable, which is the basis for a low-cost, pluggable interface backplane. It’s designed to minimize stress and provide reliable mating during system installation, plugging, unplugging, and re-mating. The rectangular connector has two different grid options, 2.54mm or 3.96mm. The two grids are available in a variety of orientation configurations, with the ability to identify each IDC in a system by its row relationship to another.

The 416-83-256-41-012101 works through the principle of electromechanical contact. It eliminates the need for soldering connections as the signal wires are crimped onto the contact and then inserted into the connector. The IDC module is secured to the system board by either screws or solder. When assembled, the IDC/cable assembly is self-extinguishing for superior insulation integrity. The contact leaves no gap between the IDC and the insulation displacement contact and provides an electrical connection even in the tightest of environments.

The 416-83-256-41-012101 has a shielding option. The shielding is made up of a ground plate and four grounding claws that fit onto studs on the back of the card edge. Shielding helps to reduce crosstalk and any other electromagnetic interference. It offers outstanding electrical performance with an insertion loss of 1.0dB (max) and an insertion voltage of 6V (max).

The 416-83-256-41-012101 has a standard operating temperature range of -25ºC to +85ºC but the exact operating temperature range should be checked in the product datasheet. The recommended cable type for this part is a flat ribbon cable with 26 AWG (0.13mm) conductor with an insulation displacement contact (IDC) termination.

416-83-256-41-012101 is one of the most complete and reliable rectangular connectors available in the market. It is perfect for small and devices where space for connections is extremely limited. It offers a secure connection at a low cost with minimal assembly time. It is available in a variety of configurations and as such, it is the perfect solution for a broad range of applications.

The specific data is subject to PDF, and the above content is for reference