4232-122G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Inductors are important components in electrical and electronic circuits which act to store and control electrical energy. Fixed inductors, also known as fixed-value inductors, are usually composed of a coil of wire surrounded by a magnetic core and are typically used in high frequency applications.
The 4232-122G is a type of fixed inductor which can be used in a variety of applications, especially for high frequency applications. The 4232-122G has a fairly low power rating of 5 W and is rated for operation up to 350V. It also features a very low series resistance of
0.2 Ω and a good inductance of 3.6 mH.

4232-122G Application Field and Working Principle

The 4232-122G fixed-value inductor is widely used in high-frequency circuits, such as radio-frequency circuits, in order to reduce RFI (Radio Frequency Interference). It is also suitable for stage feedback circuitry for large-signal amplifiers. Moreover, this inductor is mainly used in communication devices, DC/DC converters, disk drives, and television receivers.
The 4232-122G inductor is based on the principle of mutual inductance. It consists of two coils of wire wound on a magnetic core. When an alternating current flows through the two coils, a magnetic field is produced in the core which induces a current in each coil. This current then induces a voltage across each coil, thus creating a mutual inductance between the two coils.

The 4232-122G is a type of fixed inductor which is capable of operating at frequencies up to 350MHz. It has a very low series resistance which helps reduce losses at higher frequencies. The inductance value is also relatively high, at 3.6 mH, which ensures that the inductor is able to handle higher frequencies. Additionally, the 4232-122G is rated for a maximum current of 5A and a power rating of 5W, which makes it suitable for a variety of applications.

The 4232-122G inductor is relatively easy to install and maintain. It can be easily mounted using two screws and is enclosed in a plastic case to protect it from physical damage and weather. Additionally, the inductor can withstand temperatures up to 85°C, so it is suitable for use in a wide range of environments.

Conclusion

The 4232-122G fixed-value inductor is an ideal choice for a variety of applications. It features low series resistance, a high inductance value, and is rated for operation up to 350V. Additionally, it can be easily installed and maintained and is rated for a maximum current of 5A and a power rating of 5W. This makes it suitable for a wide range of applications such as communication devices, DC/DC converters, and disk drives.

The specific data is subject to PDF, and the above content is for reference