4302-182G

DC Resistance (DCR):	800 mOhm Max
Height - Seated (Max):	0.095" (2.41mm)
Size / Dimension:	0.115" L x 0.105" W (2.92mm x 2.66mm)
Supplier Device Package:	--
Package / Case:	2-SMD
Mounting Type:	Surface Mount
Inductance Frequency - Test:	7.9MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	60MHz
Q @ Freq:	30 @ 7.9MHz
Series:	4302
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	430mA
Tolerance:	±2%
Inductance:	1.8µH
Material - Core:	Iron Powder
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are electronic components that are designed to store electrical energy in the form of magnetic energy. They are typically used in a variety of applications, such as oscillators, resonators, filters, voltage regulators, switches, and power supplies. A particular type of fixed inductor, known as the 4302-182G, is utilised in a variety of automotive, commercial, and industrial applications. This article will discuss the application field and working principle of the 4302-182G fixed inductor.The 4302-182G fixed inductor is a non-polarised device that is designed to provide high maximum current with relatively low dc resistance. It is characterised by excellent frequency characteristics, which makes it suitable for a wide range of frequency applications. This type of inductor is typically used in high-frequency networks, such as television circuits and radio-frequency transmission lines. The 4302-182G is also suitable for power-supply smoothing and filter applications.The 4302-182G fixed inductor is constructed from two layers of wire-wound windings in a single-layer coil. The windings are wound around a specially designed iron-core material, which is designed to minimise losses at higher frequencies. The entire assembly is then fixed into a sealed plastic case. The inductance of the 4302-182G is determined largely by the number of turns in the windings and the core material.The working principle of the 4302-182G fixed inductor is based on Faraday’s law of induction. This law states that when a varying magnetic field is applied to a conductor, it induces an electric current in the conductor. When a varying current is applied to the 4302-182G inductor, a magnetic field is produced. This magnetic field produces a voltage that is in accordance with Faraday’s law. The voltage output of the 4302-182G is determined by the number of turns on the windings, the core material, the applied frequency, and the applied current.The 4302-182G fixed inductor is designed for use in a variety of electrical and electronic applications. It can be used as a high-frequency oscillator, as a band-pass filter, or as an impedance matching element. It is also suitable for use as a coupling device for voltage signal between stages of a circuit. Additionally, the 4302-182G can be used in power-supply circuits, where it acts as a smoothing and filter inductor.In conclusion, the 4302-182G fixed inductor is an important part of any electronic system or design. It is constructed with two layers of wire-wound windings in a single-layer coil, and the entire assembly is then sealed into a plastic case. The 4302-182G can be used in a variety of applications, including television circuits, radio-frequency transmission lines, oscillators, band-pass filters, impedance matching, voltage signal coupling, and power-supply smoothing. It works according to Faraday’s law of induction, and it has a high maximum current rating and excellent frequency characteristics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description