4306M-101-221LF

Number of Pins:	6
Height - Seated (Max):	0.250" (6.35mm)
Size / Dimension:	0.584" L x 0.085" W (14.83mm x 2.16mm)
Supplier Device Package:	6-SIP
Package / Case:	6-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	250mW
Series:	4300M
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	5
Tolerance:	±2%
Resistance (Ohms):	220
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 4306M-101-221LF is a type of resistor network, array, that is used in various applications. It is a two-resistor element array, consisting of two resistors with a ratio given in the part number suffix. This array provides a sensing, isolation, and various other types of functions. It can be used to provide a protection mechanism in a circuit, to help maintain insulation, or to maintain or alter the gain of a power amplifier.This array is composed of two resistors with different resistance values. The two resistors form an unbalanced bridge circuit, with one resistor considered the reference. The resistance ratio is given by the part number suffix number (100:1, 101:1, etc.). It is important to note that when measuring the resistance ratio, it is the reference side that is measured against the other for accuracy.The 4306M-101-221LF array can be used in a variety of applications, such as power amplifiers, audio systems, and lead detection systems. In power amplifiers, it can be used to maintain the gain of the amplifier. For example, if the input signal is weak, the gain amplifier will need to increase in order to amplify the signal. By using the 4306M-101-221LF, the gain can be adjusted easily to provide sufficient gain.In audio systems, this resistor array can also be used. It can be used to provide isolation between inputs and outputs, ensuring that signals are not interacting in unexpected ways. It can be used to, for example, prevent distortion caused by the interference. In addition to this, the array can be used to adjust the ratio of inputs to outputs, allowing for precise control of the audio signal.The 4306M-101-221LF can also be used for lead detection systems. Lead is a hazardous toxin in water and in premises, and the detection of lead can be performed with the 4306M-101-221LF. When lead is in the water, the array detects the amount of lead and provides a signal that can be used to accurately signal the presence or absence of lead in the water.In short, the 4306M-101-221LF is a two-resistor element array with different resistance values ratio controlled by the part number suffix. It can be used in power amplifiers, audio systems, and lead detection systems. It provides enhanced isolation and gain control and can be used to accurately detect the presence or absence of lead in water.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description