4306R-102-220LF

Number of Pins:	6
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	0.584" L x 0.085" W (14.83mm x 2.16mm)
Supplier Device Package:	6-SIP
Package / Case:	6-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±250ppm/°C
Power Per Element:	300mW
Series:	4300R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	3
Tolerance:	±1 Ohm
Resistance (Ohms):	22
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, ArraysResistor networks and arrays are a type of electrical component used to control current flow in the circuit. They are most commonly used in electronic systems, such as those used in automobiles. A resistor network is made up of various resistors connected in a series or parallel configuration. An example of a resistor network is the 4306R-102-220LF, which is an SMD resistor array consisting of 10 resistors.The 4306R-102-220LF is a surface mounted device (SMD) and is composed of a series of resistors and a common connector block. The resistors are connected in a continuous circuit, with one end of each resistor connected to the common connector block. The other end of the resistors are then connected to the circuit board by a series of surface mounted pads.The 4306R-102-220LF is mainly used to provide a fixed amount of resistance in the circuit. The resistance of the network can be adjusted by adding or subtracting individual resistors from the network. The resistance can also be varied by adjusting the connection point of the resistors, allowing for the optimization of current flow. This type of network is commonly used for voltage regulating devices, such as LEDs, and in power supplies.The working principle of the 4306R-102-220LF is based on Ohm’s Law, which states that the voltage across a resistor is proportional to the current that is flowing through it. When a resistor is placed in a circuit, the current is divided equally among all of the resistors. As the current flows through the resistors, the voltage across each resistor is determined by its resistance. By changing the number or resistance of the individual resistors, the voltage across them can also be adjusted.The 4306R-102-220LF is designed for use in automotive, aerospace, and other electronic and electrical applications where a fixed amount of resistance is needed. It is ideal for use in applications that require precise control over current flow. These types of applications include power supplies, audio amplifiers, and instrumentation systems. The 4306R-102-220LF provides high accuracy, stability, and reliability when used in these applications.In conclusion, the 4306R-102-220LF is a resistor network that is made up of various resistors connected in a series or parallel configuration. The resistance of the network can be adjusted by changing the number of resistors, or by varying the connection point of the resistors. It is most commonly used for applications that require precise control over current flow, and provides high accuracy, stability, and reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description