4308H-101-392

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays consist of several resistors connected in series or in parallel. The 4308H-101-392 is a through-hole component comprising a network of four resistors inside a plastic cylindrical housing. Its primary application is in filtering and distributing low voltage power to various electronic components.

The resistors in the 4308H-101-392 are connected as two resistors in series, each resistor forming one half of a sub-network. The resistance of a 4308H-101-392 is determined by resistor values in its two sub-networks. Specifically, it is the product of the two resistors in each sub-network multiplied together. The total resistance of the 4308H-101-392 is then the sum of the two sub-networks.

The 4308H-101-392 is typically used to regulate and stabilize the current of small-current electrical systems. It can also be used to reduce the voltage of a power source and to limit the amount of current flowing through a circuit. These features allow the 4308H-101-392 to be used in a variety of applications including mobile phones, traffic signals, and computers.

The working principle of the 4308H-101-392 is based on a phenomenon called voltage divider. Voltage divider is a method of dividing a voltage into multiple outputs according to the ratio of two resistors connected in series. This is accomplished by connecting two resistors in series and applying a voltage source to the junction between them. The voltage at the junction will be divided into two parts, with each part proportional to the value of the resistor. In the case of the 4308H-101-392, the two resistors in each sub-network form a voltage divider to ensure a precise voltage-to-current ratio.

The 4308H-101-392 is an important component in low-voltage electrical systems because it provides accurate voltage regulation. The 4308H-101-392 has a wide operating voltage range, from 3 volts to 8V, and a relatively low total resistance. This makes it ideal for applications where low-level signals need to be accurately regulated, such as with medical instruments and instrumentation.

In summary, the 4308H-101-392 is a through-hole component comprising a network of four resistors in a plastic cylindrical housing. Its resistors are connected as two resistors in series, each forming one half of a sub-network. The 4308H-101-392 is used to filter and distribute low-voltage power, provide voltage regulation, and limit current flow. The resistors in each sub-network form a voltage divider, providing precise voltage-to-current ratio at a wide operating voltage range.

The specific data is subject to PDF, and the above content is for reference