Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks, arrays and other components play a vital role in the operation of electrical systems. One such component is the 4308M-102-102LF, which is a low-OHM resistor array. The resistor array has 8 resistors, each of which has a resistance value of 1.00K ohm (1000 ohms). The array is designed to be used in applications that require high accuracy and precision when measuring voltages.

Application Field

The 4308M-102-102LF is a low-ohm resistor array, which is typically used in precision measurement applications. These include:

• Electrical/electronic circuit design
• Data acquisition
• High-fidelity audio signal processing
• Industrial automation and process control
• Telecommunications
• Sensors

In addition to these applications, the 4308M-102-102LF can also be used in other applications where accurate measurements are necessary. These include robotics, automotive, medical, and aeronautical systems.

Working Principle

The working principle of the 4308M-102-102LF is simple. The array consists of 8 resistors that are wired in parallel. This means that although each of the resistors has a resistance value of 1.00K ohm (1000 ohms), the total resistance of the circuit is much lower, typically around 7 ohms. This low resistance allows the array to be used for precision measurements, as the reduction in resistance results in greater accuracy.

When voltage is applied to the circuit, the current is divided among the 8 resistors. The amount of current that is drawn by each resistor is determined by the amount of resistance it has. The more resistance it has, the less current it will draw. This allows the circuit to measure voltages accurately and precisely over a given range. The range of voltages that can be accurately measured with the 4308M-102-102LF will depend on the specific application in which it is used.

Conclusion

The 4308M-102-102LF is a low-ohm resistor array that can be used for precision measurement applications. The array consists of 8 resistors that are wired in parallel, which results in a low total resistance of around 7 ohms. When voltage is applied, the current is divided among the 8 resistors, which allows the circuit to accurately measure voltages over a given range. The 4308M-102-102LF can be used for numerous applications, including electrical/electronic circuit design, data acquisition, high-fidelity audio signal processing, industrial automation and process control, telecommunications, and sensors.

The specific data is subject to PDF, and the above content is for reference