Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The 4308M-102-560LF Resistor Network is a component used in many electrical devices for both power and signal circuitry applications. It is typically used in voltage dividers, current limiting, wave shaping, impedance matching, and other nonlinear applications. The 4308M-102-560LF Resistor Network consists of two numerically equal metal-oxide film resistors, connected in a 4-terminal network. The 4-terminal junctions are configured in a connected series-parallel circuit which adds the individual resistor values together while increasing the power dissipation capabilities of the single resistor package. By combining the resistors in this manner, the 4308M-102-560LF can be used to provide the voltage division, current limitation, or wave shaping needed to achieve the desired electrical response.

The 4308M-102-560LF Resistor Network’s operating principle and characteristics are fairly straightforward, but may take some time to understand. The 4308M-102-560LF Resistor Network consists of two resistors and four terminations. The two resistors in the network are grouped together in series and in parallel, and the group is connected to one of the four terminations. The resistance of each resistor in the group, R1 and R2, is equal to the combined resistance of the group, R, and the total resistance of the group is twice the resistance of each resistor. In other words, the resistance of the 4308M-102-560LF Resistor Network is two times the value of either R1 or R2, depending on the configuration.

The 4308M-102-560LF Resistor Network works by dividing the incoming voltage or current according to the position of the resistors. The incoming signal is divided into two components by the connection across the series/parallel resistors, and the voltage and current outputs are controlled depending on the position of the resistors. In this way, the 4308M-102-560LF Resistor Network can be used to provide the required voltage division, current limitation, or wave shaping to attain the desired electrical response.

The 4308M-102-560LF Resistor Network is used in many applications, such as voltage dividers, current limiting circuits, and wave shaping. In voltage dividers, the device functions to reduce the applied voltage to a lower level by providing a high resistance between two points in the circuit. In current limiting circuits, the 4308M-102-560LF can be used to reduce the current flowing through a circuit by providing a low resistance between two points in the circuit. In wave shaping, the device can be used to shape the waveform of a signal by providing different resistances at different points in the circuit.

The 4308M-102-560LF Resistor Network is an invaluable component for any circuit designer, and offers a number of advantages over other components. The circuit sizes for 4308M-102-560LF networks are significantly smaller than with other components, and their cost is typically much lower than other resistors due to their simplified manufacturing process. Additionally, the 4308M-102-560LF Resistor Network is highly reliable and can be used in a wide range of different applications. The combination of all these benefits makes the 4308M-102-560LF Resistor Network a perfect choice for any circuit designer.

The specific data is subject to PDF, and the above content is for reference