4311R-101-104LF

Number of Pins:	11
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	1.084" L x 0.085" W (27.53mm x 2.16mm)
Supplier Device Package:	11-SIP
Package / Case:	11-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	4300R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	10
Tolerance:	±2%
Resistance (Ohms):	100k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks are a type of electronic component that is composed of a number of different resistors with a specific purpose. These networks are used in a variety of different applications, such as in circuit protection, signal processing, and power management. One such resistor network is the 4311R-101-104LF. This resistor network is specifically designed for applications in high-voltage and power management.The 4311R-101-104LF is an example of a surface mount technology (SMT) resistor network, which is a type of passive component used to for regulating the flow of electricity. This SMT resistor network is composed of three resistors with different resistances. The resistors are connected in series, meaning that the total resistance of the network is the sum of the individual resistances. This type of resistor network is known as a three-terminal network because it has three terminals to connect devices, such as transistors and other components, to the network.The 4311R-101-104LF resistor network is most commonly used in power management applications, but it can also be used for signal processing and other applications. In power management applications, the resistor network is used to protect sensitive components from voltages that exceed their specified limits. This protection ensures that the components will not be damaged during operation, allowing the device or circuit to function smoothly.In signal processing applications, the resistor network is used to modify a signal’s amplitude or frequency. The resistors in the network will act as a low-pass filter or a band-pass filter, filtering out undesired frequencies, allowing only the desired frequencies through. This type of filter can be used to filter out noise or other unwanted signals.The working principle of the 4311R-101-104LF resistor network is based on Ohm’s Law. Ohm’s Law states that the current flowing through the resistor network is proportional to the voltage applied to it and the total resistance of the network. This means that the resistance of the network can be modified by changing the voltage, allowing the current to be regulated.The 4311R-101-104LF resistor network is an efficient and reliable component for applications in high-voltage and power management. Its three-terminal design makes it easy to connect different components to the circuit, while its rate-voltage characteristics allow current to be precisely regulated. Its Surface Mount Technology ensures that the component is easy to install and durable, making it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description