435-10-230-00-160000

Rectangular connectors are widely used across a wide array of applications, from medical and industrial markets to automotive, consumer electronics and more. Among these different types, one of the most popular designs is the 435-10-230-00-160000 application field and working principle, also known as a header with male pins.

Overview of the Connector Structure

The 435-10-230-00-160000 headers are typically employed in circuit board applications to provide a mechanical connection for a wide variety of products. As the name implies, these connectors consist of two rectangular sides that line up together; one side features a series of male pins that make electrical contact with the corresponding receptacles on the other side. Depending on the design, the pins can vary in size and number, and can be positioned either longitudinally (in-line) or laterally (side-by-side).

Assembly Process

The assembly process of the 435-10-230-00-160000 headers is fairly straightforward and can typically be completed in just a few steps. First, the male pins are aligned together and inserted into the pin header. A ribbed plate then helps hold the pins in place, preventing excess movement. Grooves along the header provide spaces for the pins to slide into, as well as allowing better physical contact. It’s important to note that the orientation of the pins must be correct: wrong orientation can result in short-circuiting, or other safety issues.

Once the pins are in place, a locking mechanism is used to secure them in place. This usually involves clips on either side of the header – when these clips are pushed in, they latch onto the pins and hold them in position. Again, it’s important to make sure that the clips are properly latched, as otherwise the connection won’t be stable. After the pins are properly secured, the connector can be placed on the circuit board.

Operation and Working Principle

Once the 435-10-230-00-160000 connectors are installed on the circuit board, they are ready for operation. When voltage is applied to the male pins, the corresponding female receptacles on the other side of the connector will make electrical contact, thereby providing power to the The device in question. The current then passes through the pins to the other side of the connector, completing the circuit. This type of connection is known as a “0-1” connection, because the pins in the male side are energized on and off alternately.

In summary, the 435-10-230-00-160000 headers form a bridge between two different circuits, allowing current to pass through the pins in the male side, and then through the corresponding receptacles on the opposite side. This type of connection is typically used in a wide array of applications that require an efficient and reliable connection.