44-BCR24H-NRO

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Panel Indicators, Pilot Lights are mechanical switches and indicators which are employed in electrical and electronic devices. The 44-BCR24H-NRO is one such device, which provides an indication of the illuminated load that can be connected to a single pole switch. It is commonly used to indicate when a load is connected to a switch and will also indicate when a load has been switched off.

The 44-BCR24H-NRO is a two-pole device that is designed to be used where there is a need for a single load to be indicated. It operates with a 24 VDC power supply and has two outputs, a 24 VDC LED pilot light and an N/O contact that is used to indicate when a load has been turned off. The pilot light has four LED elements which are used to indicate the status of the load. These LED elements comprise a green LED that indicates when the load is on, and a red LED that indicates when the load is off.

The 44-BCR24H-NRO is constructed with a molded plastic housing and a NEMA type 5-15A watertight and dust-tight terminal. This terminal is rated for use up to 15A at 120V AC and features two pole operation that is designed to be used in parallel or series for a total current rating of 15A. It is also designed to be used with a single pole switch that can be mounted in the control panel of the equipment to which it is connected. The terminal block features an illuminated status indicator that is visible when the device is in operation.

The working principle of the 44-BCR24H-NRO is based on the use of two electrical circuits, one circuit for the illuminated element and the other circuit used to control the switch. The current is carried through the two circuits via two different paths. The illuminated element is operated by a current that flows through the two terminals and is regulated by a control chip. The control chip acts to measure the current and adjust the illumination level by increasing or decreasing the current flow. The second circuit operates the switch. This circuit consists of a relay and a switch contact. The relay energises the switch contact when the control chip detects a certain amount of illumination and deenergises it when the control chip detects a lesser amount of illumination.

The 44-BCR24H-NRO is a versatile and highly reliable device that provides an indication of a single load to a single pole switch. Its illuminated pilot light and N/O contact provide a clear indication of when a load is connected or disconnected. The two-pole operation allows for a higher current rating of 15A at 120V AC and its molded plastic housing provides an effective seal against dust and water entry. The device is easy to install and its simple operation is based on the use of two electrical circuits.

The specific data is subject to PDF, and the above content is for reference