Allicdata Part #: | 44-CBSA-0.75X3.0X0.4-ND |
Manufacturer Part#: |
44-CBSA-0.75X3.0X0.4 |
Price: | $ 14.67 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 44 SERIES CBS SHIELD ASSEMBLY |
More Detail: | RF Shield Shield, 2-Piece 0.750" (19.05mm) X 3.000... |
DataSheet: | 44-CBSA-0.75X3.0X0.4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 14.67000 |
Series: | 40-CBS |
Packaging: | Bulk |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.400" (10.16mm) |
Length - Overall: | 3.000" (76.20mm) |
Width - Overall: | 0.750" (19.05mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shields are typically designed to prevent radio frequency interference (RFI) from entering or leaving a circuit or enclosure. It is important for these devices to operate at the correct frequency and provide sufficient impedance levels for the RFI to be attenuated. The 44-CBSA-0.75X3.0X0.4 RF shield is designed to provide ultimate protection against most types of RFI.
The 44-CBSA-0.75X3.0X0.4 RF shield is a 3D-shielded cylindrical enclosure that is constructed of anodized aluminum with a 1.5 oz copper RF shield. This design is unique in that it provides a uniform low frequency attenuation level of approximately 150 dB. It also has a very wide frequency range of 1.5 MHz to 100 GHz, and no frequency-dependent attenuation. This makes it ideal for applications where strong RFI is present, such as military and aerospace.
The 44-CBSA-0.75X3.0X0.4 shield has a uniform impedance of 75 ohms, which is the standard for most RF impedance systems. This ensures that most signal energy is being reflected from the shield rather than absorbed. The anodized aluminum housing also provides an additional layer of environmental protection.
The 44-CBSA-0.75X3.0X0.4 shield is designed with an SMA connector on the outside, which is typically used to couple the shield to a device or system. This allows for easy connection and provides additional protection from interference.
The 44-CBSA-0.75X3.0X0.4 shield is designed to provide maximum protection against RFI in both transmitting and receiving applications. In transmitting applications, the shield is designed to reflect most of the signal energy away from the system. This reduces the overall amount of interference generated by the system and reduces the risk of damaging components. It also provides an extra layer of protection against external interference.
In receiving applications, the shield is designed to absorb RFI before it reaches the device or system. This reduces the amount of interference that can reach the device or system and can also reduce the amount of noise generated by the system.
The 44-CBSA-0.75X3.0X0.4 shield is ideal for a wide variety of applications. It is particularly useful in military, aerospace, and telecommunications systems where strong RFI must be controlled. It is also used in industrial and consumer electronics to provide a degree of protection against external interference.
In conclusion, the 44-CBSA-0.75X3.0X0.4 RF shield is a versatile and effective device for controlling RFI. It provides a wide frequency range, uniform impedance, and a unique 3D-shielding design that provides an additional layer of environmental protection. This makes it ideal for a variety of applications where strong RFI must be controlled.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...